Berger Titanium maneuvering aid semi-automatic anthracite + LiFePO4 lithium battery Pro 200 Ah 12 V with Bluetooth & heating in a set
Product details
| Tractive force single-axle or double drive: 2,250 kg | Tractive force tandem axle or quadruple drive: 3,500 kg | Uphill up to 25 % gradient at 2,250 kg (single-axle vehicle) | Easy to retrofit on tandem axles | Integrated battery management system (BMS) | Series and parallel connection of the LiFePO4 battery possible |
Product description
Practical set consisting of maneuvering aid and 200 AhLiFePO4 battery: light, powerful, reliable
Whether on steep slopes, boggy terrain or sandy ground - the Berger maneuvering aid makes it possible to maneuver even heavier caravans (single-axle up to 2,250 kg, tandem-axle up to 3,500 kg) with precision. One maneuvering aid (i.e. 2 motor units) per axle: With a tandem axle, you need 2 maneuvering aids (i.e. a total of 4 motor units), which can still be controlled with a user-friendly remote control and a control box.
A real dream team: With the fully charged 200 Ah LiFePO4 battery, the Berger Titanium 2.0 maneuvering aid can theoretically be used for up to approx. 8 hours in average operation. Even under high loads, the capacity is sufficient for around 2.6 hours - more than enough for numerous maneuvering manoeuvres on the campsite.
Details Titanium 2.0 maneuvering aid:
- Convenient maneuvering at a speed of 12 cm per second via remote control
- Corrosion-resistant, splash-proof housing made from lightweight aluminum
- Extension to tandem axle possible
- Toothed drive rollers for good grip and a long service life
- Extensive mounting accessories suitable for many common caravan brands (except Eriba and Weinsberg)*
- Efficient motors and low power consumption
Technical data Titanium 2.0 maneuvering aid:
- Width of the caravan min./max.: 1,800 / 2,500 mm
- Max. Speed: approx. 12 cm per second
- Climbing ability max. 25 % at 2,250 kg (single axle)
- Rated voltage: 12 V
- Average current consumption: 25 A
- Max. Current consumption: 76 A
- Weight: 36.2 kg
*Depending on the vehicle model and chassis, additional mounting accessories (e.g. adapter) may be required. Please check compatibility with your caravan in advance. Please contact our technical advice or our customer service.
Experience the future of energy supply with the Berger LiFePO4 lithium battery
With a capacity of 200 Ah and a maximum continuous discharge current of 200 A, this battery is ideal for demanding applications in your motorhome and caravan. Its low weight and fast charging times ensure maximum efficiency. Thanks to Bluetooth, you can conveniently monitor the battery via your smartphone. The integrated battery management system (BMS) monitors and controls the battery. This optimizes the performance, service life and safety of the battery. This battery offers you the perfect combination of capacity, load tolerance, freedom from maintenance and safety.
PRO version with heating: In addition to maximum performance - even in the cold - it offers further advantages:
- Improved performance even in the cold: With a heater, the temperature of the battery is kept at an optimum level, so you can count on reliable performance even in frosty conditions.
- Protection against damage from low temperatures: Low temperatures can not only reduce performance, but can also lead to permanent damage to the battery.
- Extended service life: Deep discharges at extreme temperatures are prevented, which increases the overall service life of the battery.
- The heating function is automatically activated when the battery temperature is ≤ 0 °C during charging.
Details LiFePO4 battery Pro 200 Ah:
- Significantly lower energy losses than a comparable AGM or gel battery
- LiFePO4 technology for maximum service life
- High resistance to mechanical stress, e.g. off-road driving
- Short charging times for maximum efficiency
- Stable voltage: appliances such as toasters and air conditioners can be operated without any problems
- Bluetooth monitoring: Simply monitor the battery with your smartphone (iOS/Android)
- High cycle stability: Durable and reliable
- Significant weight advantage: over 50% lighter than lead batteries with the same design
- Versatile charging options: Charging with shore power and solar panel
- Integrated battery management system (BMS) for maximum safety through permanent control and monitoring of the battery
Technical data LiFePO4 battery Pro 200 Ah:
- Nominal voltage: 12.8 V
- Nominal capacity: 200 Ah
- Nominal energy: 2560 Wh
- Max. Continuous discharge current: 200 A
- Peak discharge current: 400 A (< 3 seconds)
- Recommended charging current: 100 A
- Maximum charging current: 200 A
- Recommended charging voltage: 14.6 V
- BMS cut-off voltage: < 15 V
- Charging temperature: 0 to 60 °C
- Discharging temperature: -20 to 65 °C
- Storage temperature: 0 to 40 °C
- BMS high temperature cut-out: 65 °C
- Restart temperature: 48 °C
- Protection class: IP65
- Dimensions incl. handles and poles: 38.5 x 19 x 26.5 cm
- Weight: 18 kg
Guarantee:
We offer a 5-year Berger guarantee on this product!
12 V parallel connection of several batteries
Any number of batteries of the same brand, type, age, capacity and state of charge can be connected in parallel to increase the capacity.
24 V / 36 V / 48 V series or series connection of several batteries
A maximum of 4 batteries (48V) of the same brand, type, age, capacity and state of charge can be connected in series to increase the output voltage.
Customer questions
Is the battery also suitable as a starter battery?
The Berger LiFePO4 battery is primarily designed for deep-cycle applications such as solar storage, motorhomes or on-board power supply. It is not intended for use as a starter battery, as starter batteries have different requirements in terms of short-term current and cold behavior. For optimum function and a long service life, we recommend using it as a supply or body battery.
Is the battery compatible with conventional chargers for AGM or gel batteries?
The Berger LiFePO4 battery is optimized for operation with LiFePO4-compatible chargers. Many modern chargers can be set to a lithium or LiFePO4 mode and can therefore be used without any problems. Conventional AGM or gel chargers without a suitable lithium characteristic curve may result in incomplete charging or reduced performance and service life. For the best possible performance, maximum safety and full capacity utilization, we therefore recommend using a charger with explicit LiFePO4 approval. Many high-quality chargers for AGM or gel batteries have a lithium mode or are approved for LiFePO4 batteries according to the manufacturer. Please check the charger manufacturer's specifications.
When is the battery heater activated?
The heating function is activated automatically as soon as the battery temperature is ≤ 0 °C during the charging process. At this point, the BMS (battery management system) interrupts the charging process and gives priority to the heating. As soon as the temperature reaches +5 °C, the charging process continues automatically. If the temperature rises above 10 °C, the heating function is deactivated.
Does my charger need to be converted?
In many cases, no conversion is necessary. Many modern AGM or gel chargers have a lithium or LiFePO4 mode or can be set accordingly. If your charger does not offer a setting, we recommend using a LiFePO4-enabled charger in order to utilize the full capacity and service life of the battery.
Scope of delivery:
- 1 x Berger Titanium 2.0 maneuvering aid semi-automatic anthracite
- 2 x motor unit
- Electronic control unit
- Remote control
- Main connecting rod
- Drive center rod
- Actuator connecting rod
- Engaging tool
- Chassis top clamping plate
- Chassis U-plate
- Chassis clamping plate bottom
- Motor cable 5 m
- Battery connection cable 1.6 m
- Flat plug
- Battery disconnect switch (key and fastening material)
- Spacer
- Operating instructions, incl. general operating permit (ABE)
- Screws and nuts, flexible cable protection conduit, chip bolts, lock nuts, washers, sheet metal screws, cable clamp, sheet metal clamp, eyelets, cable markings, pole markings, cable ties, AAA batteries (for remote control)
- 1 x Berger LiFePO4 Lithium Battery Pro 200 Ah 12 V with Bluetooth & heating + operating instructions
Features
| Type of manoeuvring aid | Manoeuvring aid |
| ean | 4071218002571 |
Legal information
Manufacturer information
Fritz Berger GmbH
Dr. Matthias Herfeld
Fritz-Berger-Strasse 1
92318 Neumarkt
Germany
customer-service@berger-camping.com
Note
Please note: since our deliveries may contain batteries (single-use and rechargeable),
according to the German Law on Batteries (BattG) we must advise you of the following:
single-use and rechargeable batteries must not be disposed of along with domestic waste, but rather you are legally required to return used batteries. Used batteries may contain damaging substances which, if not stored or disposed of appropriately, may damage the environment or your health. Batteries may, however, also contain important raw materials, such as, for example, iron, zion, magnesium or nickel, which can be recycled. Once used, you may either send the batteries back to us, or return them in
your vicinity (e.g. at the shop, communal recycling points or at our expedition warehouse) - free of charge. When returning used batteries to points of sale, the quantity you are allowed to return is limited to the quantity typical for a single end user, and to those batteries which the seller offers or used to offer in their product range.
The symbol with a rubbish bin crossed out means that you must not dispose of single-use and rechargeable batteries
along with the domestic waste. Underneath this symbol you will also find the following symbols which have the following
meanings:
Pb: battery contains lead
Cd: battery contains cadmium
Hg: battery contains mercury
Return address:
Fritz Berger GmbH
Fritz-Berger-Str. 1
D - 92318 Neumarkt
