BioToi Dry Separating Toilet RL Nugget

Tailor-made for all Ford Nugget models from 2014 with short wheelbase!!!

- Housing made of stainless steel - hygienic, aging resistant, environmentally friendly
- Bowl and lid made of polypropylene (PP-C)
- Width 332 mm, depth 385 mm, height 388 mm (ultra-compact despite maximum tank volume)
- Weight: approx. 6,5 kg
- loadable up to 200 kg
- Urine tank with 10 l usable volume
- Solids tank (volume 15 liters) with agitator and removable crank (both stainless steel, crank optionally on the right or left without conversion)

Scope of delivery:

- Housing with bowl and lid
- Solids container with agitator
- Powerful crank handle (laser-welded stainless steel), can be attached either on the right or left side
- Urine tank with odor trap, union nut and extra-large outlet for quick emptying
- Docking station for ventilation: this system, also patent pending and tailor-made for the Ford Nugget, allows the BioToi to be ventilated in the storage compartment. Once pulled out, the toilet is without a fixed hose connection. This facilitates handling in the vehicle.
- Side handle (the BioToi stands crosswise in the storage compartment, the handle makes it easier to pull it out)
- 2 sliding foils for the bottom of the housing (the Teflon-coated fabric pieces are self-adhesive. They protect the vehicle floor and reduce manual forces when pulling out)
- Fan unit for automatic interval or continuous operation with integrated low-voltage protection
- Control switch for the fan unit (on / off / interval) with connection terminals and mounting material
- 1.5 m fan hose
- 2 spray bottles (1x for cleaning the urine bowl and 1x to use the BioToi as a makeshift bidet)
- 1 coconut brick (drying material for use in the solids tank)
- Operating and assembly instructions
- NEW: incl. 3 m extension cable incl. high quality cable clamps to supply the fan with power from the lamp on the roof bed.

For which application was the BioToi RL Nugget Edition developed?

The docking station is the tailor-made solution for the current Ford Westfalia Nugget with short wheelbase. It fits in the storage compartment of the Nugget with pop-up roof and in that of Nugget with high roof. It also fits in older Nuggets if the storage compartment is high enough. When mounting in older Nuggets, the docking station must be adjusted slightly.