Product description
Carguard shutter rear view camera with two separate camera modules for 12V to 24V, only for mobile navigation systems (incl. switch box for 12V-24V)
Description of function:
With our extremely robust and high-quality rear view cameras, you can upgrade mobile navigation systems with rear view camera input from numerous manufacturers to a full-fledged rear view video system or opt for a more attractively priced package consisting of our navigation system and a rear view camera of your choice. The shutter opens and the camera image is displayed on the screen when reverse gear is engaged.
The replaceable windscreen wiper in the cover flap ensures a clear view in all seasons (3 interchangeable blades included)
The control panel allows you to turn on the rear-facing camera. Alternatively, you can do this using your radio or an unused switch in your dashboard. The camera serves as a rearview mirror and can be switched on while driving. As soon as you engage reverse gear, the protective flap is raised and switched to the downward-facing camera. A replaceable windshield wiper is integrated in the protective flap. During installation, you can adjust the angle of view to suit your needs by adjusting the tilt.
Device information:- designed according to IP69K, the highest protection standard for vehicle components
- Protection against water with high pressure cleaners
- Protection against permanent immersion
- Protection against foreign bodies: absolutely dust-tight
- Protection against contact/vibration
- Use of the highest quality Sony CCD electronics
- outstanding resolution: 470,000 pixels with 600 TV lines
- Image sensor: high-quality colour CMOS
- Image size: 1/3 inch
- excellent infrared LEDs guarantee a perfect image even in the dark
- Night vision up to 12 m
- powder-coated die-cast aluminium housings, feet and sunshades, which are not damaged when screwed on and are therefore strongly protected against corrosion
- waterproof screw connections
- Light sensitivity 0 Lux
- vibration resistant up to 7G
- shock resistant up to 100G
- automatic backlight compensation
- automatic brightness and white balance
- the camera image is mirrorable
- inbuilt microphone
- Heating against condensation water, anti-fog lotus coating
- Focal length camera 1: 2.6mm, F 2.0
- Focal length camera 2: 2,9mm, F 5,5
- Power consumption: < 4 W
- 150° angle of view for close-up range and 53° for long range
- no voltage connection necessary at the rear of the vehicle
- Signal-to-noise ratio: > 50 dB with automatic gain control
- Video signal output: 1 Vp-p, 75 Ohm
- Power supply: DC 9-14 V +/- 10%
- Power consumption: < 2.0 W per camera
- Dynamic range: 120 dB
- Operating temperature range: -30° C to 70° C
- Standing temperature range: -40° C to 80° C
- Camera 1 is with priority switching (automatic switching to camera image when e.g. reverse gear is engaged)
- both camera inputs can be controlled by a 12-24V signal, unused vehicle switch or the supplied remote control
- 12-24V power supply input
- extra 12V/1A power supply output
- extra video input
- Overload/short circuit protection
- Autotimer adjustable from 2-20 sec
- automatic switching to camera 1 or camera 2 (suitable for side/bending cameras)
- Camera image from camera 1 and 2 mirrorable
- IP69K waterproof and dust-resistant test (for high pressure/steam jet cleaning, specific for road vehicles)
- Salt fume test certificate
- E-Mark
- Colour shutter dual rear view camera (9-14V)
- 20 meter connection cable
- Switch box incl. voltage converter 12-24V and external control panel
- Y-camera adapter
- Sealing tape
- Sealing ring for the cable gland
- Cinch to Cinch cable
- Two pcs. Adapter 4Pin to 6Pin
- Three pcs. Spare wiper blades
Features
Type Reverse system | Camera |
Weight | 598 ml |
Night-vision camera | |
Monitor mirror function |