Nature's Head coconut fibre tile for separation toilets
Availability:
Sold out
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| purely biological | very high water capacity |
Product description
The brick consists of pressed and dried coconut fibre. The short-fibre coconut fibre is a by-product of the extraction of the long-fibre coconut fibre. It does not destroy habitats by clearing trees or cutting down wetlands (as with peat). Coconut fibre is fully biodegradable, made from renewable resources and contributes to sustainability.
Properties:
Place a coconut fibre brick (650 g) with one (!) litre of water. The easiest way to do this is in a bucket or a waterproof bag. Allow the brick to swell - at best overnight, but 30 minutes is also sufficient. With hot water it goes somewhat faster. Then pour the entire loosened up amount into the solids container of your toilet. If you use the toilet permanently with more than 3-4 persons, please put 2 bricks per filling.
You do not need a crumbly additive for each use! Since the substrate is already in the toilet, simply close the solids flap of the separating toilet, turn the crank 2-3 times and you are done. Before the first use or after emptying you need a coconut fibre brick or approx. 9-10 l peat.
Properties:
- Purely organic, non-perishable, can be stored for a very long time, unfertilized and free of stones etc.
- Very high water capacity, about 8-9 times the fibre weight
Place a coconut fibre brick (650 g) with one (!) litre of water. The easiest way to do this is in a bucket or a waterproof bag. Allow the brick to swell - at best overnight, but 30 minutes is also sufficient. With hot water it goes somewhat faster. Then pour the entire loosened up amount into the solids container of your toilet. If you use the toilet permanently with more than 3-4 persons, please put 2 bricks per filling.
You do not need a crumbly additive for each use! Since the substrate is already in the toilet, simply close the solids flap of the separating toilet, turn the crank 2-3 times and you are done. Before the first use or after emptying you need a coconut fibre brick or approx. 9-10 l peat.
Features
| Type Sanitary accessories | Consumables |
| Weight | 655 g |
| Material | Kokosfasern |
| Sanitary accessories | Suitable for |
| Dimensions (LxWxH) | 20,5 x 10,5 x 5 cm |
| Dimensions (LxWxH) | 20,5 x 10,5 x 5 cm |
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
