Votronic VAC 2416 F 3A Automatic charger 24 V 16 A
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| Specially designed for fire engines | Temperature sensor 825 in scope of delivery |
| Automatic battery regeneration | Electronics moisture protected |
Product description
Details
- Charging programs no. 1, 2, 3 and 5 (Gel, AGM, Acid, Start) as well as 4x Lithium-LiFePO4 adjustable to battery type
- The charging voltage is free of peaks and regulated to prevent overcharging of the batteries.
- Fully automatic continuous operation: the charger can be constantly connected to the battery and keeps it at full charge. In case of power failure, the batteries are not discharged (disconnected by safety switch).
- Lithium LiFePO4- Maintenance, Auto Wake Up, Maintenance Phase: Regular automatic activation of battery cell balancing every 10 days to ensure full battery charge throughout.
- Lead-acid battery regeneration twice a week during long idle periods to prevent harmful acid stratification.
- Parallel and buffer operation: in case of simultaneous consumption, the battery continues to be charged or maintained full. The charger automatically calculates and monitors the adjustment of the charging times.
- monitoring-free charging: Multiple protection against overload, overheating, overvoltage, short-circuit, reverse polarity, malfunction and battery back-discharge by electronic cut-off up to complete disconnection of charger and battery by built-in safety switches.
- Connection for battery temperature sensor (temperature sensor 825 included): For lead batteries (acid, gel, AGM), the automatic adaptation of the charging voltage to the battery temperature, causes a better full charge of the weaker battery in cold weather, in summer temperatures, unnecessary battery gassing and thus battery stress is avoided.
- For LiFePO4 batteries, the battery temperature sensor is required for the device function: It serves to protect the battery at high and especially at low temperatures below 0°C.
- Silent Run function: Noise-optimized operation at the push of a button (night operation).
- Power supply function: Enables the supply of consumers without battery (e.g. in case of battery change).
- Charging cable compensation: Voltage losses on the charging cables are automatically compensated.
- Built-in on-board power supply filter: Problem-free parallel operation with solar systems, wind and gasoline generators, alternators, etc. on one battery.
- Electronics moisture-protected
- Charging aid for deeply discharged lead batteries: Gentle pre-charging of the (lead-acid, -gel, -AGM) battery up to 8 V, then powerful support of the battery with consumers possibly still switched on.
- Built-in charging current distributor with 2 main charging outputs, both with max. current and power capacity
- In case of mixed operation with 1 supply and 1 starter battery, a separate starter charging program can be set on the built-in charging current distributor
- Starter battery is also charged with full charging current if required (short vehicle standing time)
- Separate auxiliary charge output "S" for support and maintenance charging of another starter battery or as signal output +86 for engine start inhibit when vehicle is connected to mains supply
- Equalization function (IUIU charging characteristic can be activated manually for cell equalization charging)
- Disconnection of batteries in case of mains failure, overheating, malfunction (safety switch per charge output)
- Variable installation position
- 5 "MOTOR": Charging program for lead-acid/wet batteries, characteristic IU1oU2oU3: Characteristic similar to alternator/generator for moving (mobile) use (acid stratification) with particularly low maintenance (battery gassing, water consumption). Charging and charge maintenance of starter batteries in emergency vehicles, according to a conventional proposal of the Fire Service Standards Committee (FNFW). For conventional standard starter batteries, starter batteries "Absolutely maintenance-free", "Maintenance-free according to EN", "Maintenance-free according to DIN", "Maintenance-free", "Low maintenance".
- 6 "L": Closed acid/wet batteries with water consumption: L = low according to DIN EN 50342-1, characteristic curve IU1oU2oU3. Characteristic with medium U1 level for acid batteries in vehicle-mounted or external chargers with a fixed location.
- 7 "VL": Closed acid/wet batteries with water consumption: VL = very low according to DIN EN 50342-1, characteristic IU1oU2oU3. Characteristic curve with high U1 level for acid batteries in vehicle built-in or external chargers with fixed location.
- 8 "Non-woven": Sealed batteries (VRLA) with AGM/non-woven technology: characteristic IU1oU2oU3. Characteristic for AGM batteries in vehicle-mounted or external chargers with fixed location.
- 9 "Gel": Sealed batteries (VRLA) with gel technology: characteristic IU1oU2oU3. Characteristic curve for gel batteries in vehicle-mounted or external chargers with fixed location
- BR: Automatic battery regeneration
- DC: Power supply function (battery replacement)
- FB: Remote control/display connection
- LV: Charging current distributor for one or more batteries
- TK: Temperature compensation TS Temperature sensor included in delivery
- Electronics moisture-proof
- Rated voltage (AC) in [V] 230
- Operating voltage range (AC) in [V]: 190 - 265 (full charging power)
- Power consumption (AC) in max. [W]: 520
- Sinusoidal power factor correction (CosPhi = 1): yes
- Battery capacity in [Ah]: 30 - 80 (160)
- Secondary charge output "S" in [A] -
- Charging characteristic: IU1oU2
- Voltage limitation for all charge modes/programs [V]: 30
- Voltage ripple in [mV] rms: < 50
- Number of charge outputs: 2 + MA
- Device mounting position: any
- Temperature range [°C]: -20 to +45
- Degree/class of protection: I / IP 21
- Dimensions (W x H x D) incl. mounting flanges, without connections: 210 x 71 x 160 mm
- Ambient conditions, humidity: max. 95% room humidity, non-condensing
- when vehicles are not in use for >24 hours, according to DIN 14679
- Power cable
- 1 temperature sensor
- Operating instructions
Features
| Type battery | Charger |
| Weight | 1450 g |
| Charging current | 16 A |
| Operating voltage | 24 V |
Note
Please note: since our deliveries may contain batteries (single-use and rechargeable),
according to the German Law on Batteries (BattG) we must advise you of the following:
single-use and rechargeable batteries must not be disposed of along with domestic waste, but rather you are legally required to return used batteries. Used batteries may contain damaging substances which, if not stored or disposed of appropriately, may damage the environment or your health. Batteries may, however, also contain important raw materials, such as, for example, iron, zion, magnesium or nickel, which can be recycled. Once used, you may either send the batteries back to us, or return them in
your vicinity (e.g. at the shop, communal recycling points or at our expedition warehouse) - free of charge. When returning used batteries to points of sale, the quantity you are allowed to return is limited to the quantity typical for a single end user, and to those batteries which the seller offers or used to offer in their product range.
The symbol with a rubbish bin crossed out means that you must not dispose of single-use and rechargeable batteries
along with the domestic waste. Underneath this symbol you will also find the following symbols which have the following
meanings:
Pb: battery contains lead
Cd: battery contains cadmium
Hg: battery contains mercury
Return address:
Fritz Berger GmbH
Fritz-Berger-Str. 1
D - 92318 Neumarkt
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
