Zenec ZE-RCE3804 rear view camera for Ford Transit

The ZE-RCE3804 rear view camera from ZENEC is designed for vehicles based on FORD Transit from model year 2014, including the 2019 facelift, and is suitable for all models of the 7th Transit generation, which are equipped with 3rd brake light and swing-out rear doors.

The camera module integrated into the LED brake light allows for easy plug & play replacement of the original factory brake light assembly.

The camera sensor of the ZE-RCE3804 has a swiveling sensor module for manual adjustment of the desired image capture area.

The large diagonal viewing angle of 140° for monitoring the area behind the vehicle enables safe backing and parking.

The CCD sensor used offers high resolution, good light sensitivity and good signal-to-noise ratio. Circularly placed around the sensor are 6 IR LEDs, which, controlled by an LDR light sensor, provide automatic twilight and night illumination.

The ZE-RCE3804 has an internal microphone for additional acoustic monitoring of what is happening behind the vehicle during maneuvering.

The 10 m long main system cable of the ZE-RCE3804 is equipped with screwed 4-PIN connectors. The ZE-RCE3804 is compatible with rear view camera monitors, 1-DIN and 2-DIN car infotainment devices, moniceivers and naviceivers that have a (RCA) CVBS camera input with additional microphone audio (RCA) input.

Main features

• Compact high resolution plug & play rear view camera to replace the third original brake light, for FORD Transit commercial vehicles, panel vans, 7th generation Transit minibuses, including motorhomes and camper vans based on them
• Rugged red plastic injection molded brake light main housing with stainless steel snap-in mounting brackets
• ECE 148R certified brake light (ABE/vehicle registration remains valid)
• Cam sensor with 140° diagonal viewing angle for wide monitoring area behind the vehicle
• Manually adjustable from +20° to -20° vertical field of view of the cam sensor to adjust the preferred viewing area
• IR LED illumination with 6 LEDs and dynamic brightness control via LDR element
• Integrated microphone for monitoring ambient noise via control unit
• 3-piece 10 m system cable with screwed 4-PIN connectors (also available separately as N-ZERCE3804-ISO)

Technical Specifications

• Image Sensor Cam: SHARP RJ2331 CCD Sensor (with AA9050)
• Image Sensor Type: 1/3" / 8.5mm CCD Sensor
• TV System: NTSC / 30 fps
• Viewing angle: 140° diagonal
• Native sensor SoC pixel resolution: 976 (H) x 494 (V) pixels
• Image relevant pixel resolution: 700 TV lines
• Focal length lens: 2.6 mm
• Frame rate: 30 fields/sec, interlaced
• Signal to noise ratio: > 48 dB
• Dynamic contrast: > 60 dB
• Light sensitivity: 0 lux with IR LED On
• Video output: 1.0 ±0.2 Vp-p, 75 Ω, CVBS
• White balance: Automatic
• Exposure compensation: Automatic
• Gamma correction: 0.45
• Brightness compensation: Automatic
• Synchronization: Automatic
• Power supply: 12 DCV
• Total power consumption (@12 V DC): 80 mA ±10 mA
• Protection class: IP68
• Operating temperature: -20° C ~ +70° C

Compatible with model type / model year

• FORD Transit, all variants* 7th generation / 2014 - 2019
• FORD Transit, all variants* 7th generation / 2019 facelift from 2019

* Commercial vehicles, panel vans, minibuses and other motorhome body vehicles based on the 7th Transit generation with swing-out rear doors and 3rd brake light at the top of the rear.