Caratec Reversing Video Kit for Delivery Vans
Information & Downloads
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product description
The new combination of Caratec CS110B Panel Car Camera and Caratec Mirror Monitor makes manoeuvring easy. The image of the reversing camera lies exactly in the intuitive field of vision. In addition, the guidelines, set by remote control, help to correctly estimate distances to obstacles and avoid expensive damage to the mobile home.
The integrated 10.9 cm (4.3 inch) monitor has a very high maximum brightness, making it easy to read. In addition, unwanted reflections e.g. due to sunrays in the mirror considerably less troublesome than with conventional monitors.
The monitor automatically switches on when reverse gear is engaged, while it can also be switched on conveniently via the switch below the mirror surface. The brightness is regulated automatically and is also adjustable.
The special 4 mm-thick mirror glass with "Third Surface Reflector Technology" is also used in automotive original equipment and provides optimum visibility, both as a mirror and in monitor mode.
Installation is very easy thanks to the vehicle-specific holder and cable set. A remote control e.g. to adjust the parking lines is included in the scope of delivery.
Monitor fearures:
Screen size: 4.3" (10.9cm)
Display: TFT-LCD Display
Resolution: 480 (H) x 272 (V) px
Voltage: 12 V DC
Automatic brightness adjustment: Yes
Screen size: 4.3" (10.9cm)
Display: TFT-LCD Display
Resolution: 480 (H) x 272 (V) px
Voltage: 12 V DC
Automatic brightness adjustment: Yes
Camera features:
Light sensitivity 0.1 Lux
Angle of view: 150°
Integrated microphone: no
Infrared LED: no
Casing colour: black
Dimensions (WxHxD): approx. 345 x 74 x 44 mm
Light sensitivity 0.1 Lux
Angle of view: 150°
Integrated microphone: no
Infrared LED: no
Casing colour: black
Dimensions (WxHxD): approx. 345 x 74 x 44 mm
Features
Weight | 1,7 kg |
Display diagonal | 4,3 " |
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Reviews (1)
Ralf R. 09.10.2017
"The mirror monitor is only suitable for Fiat model X290. On the X250, the mirror does not fit on the mounting premounted on the windshield. This not unimportant information is missing leather in the description, so that the assembly of the mirror monitor required a very high expenditure. Unfortunately, the holder rod on the mirror for mounting in the holder on the windshield is not available as a single part from Fiat. The product is otherwise ok!" "Der Spiegelmonitor ist nur für Fiat Modell X290 geeignet. Beim X250 passt der Spiegel nicht auf die an der Frontscheibe vormontierte Halterung. Diese nicht unwesentliche Information fehlt leder in der Beschreibung, so das die Montage des Spiegelmonitors einen sehr hohen Aufwand erforderte. Leider gibt es den Halterstab am Spiegel zur Aufnahme in der Halterung an der Frontscheibe nicht als Einzelteil bei Fiat. Das Produkt ist ansonsten ok!"
show more
"The mirror monitor is only suitable for Fiat model X290. On the X250, the mirror does not fit on the mounting premounted on the windshield. This not unimportant information is missing leather in the description, so that the assembly of the mirror monitor required a very high expenditure. Unfortunately, the holder rod on the mirror for mounting in the holder on the windshield is not available as a single part from Fiat. The product is otherwise ok!" "Der Spiegelmonitor ist nur für Fiat Modell X290 geeignet. Beim X250 passt der Spiegel nicht auf die an der Frontscheibe vormontierte Halterung. Diese nicht unwesentliche Information fehlt leder in der Beschreibung, so das die Montage des Spiegelmonitors einen sehr hohen Aufwand erforderte. Leider gibt es den Halterstab am Spiegel zur Aufnahme in der Halterung an der Frontscheibe nicht als Einzelteil bei Fiat. Das Produkt ist ansonsten ok!"
Rating was automatically translated by DeepL.
Display original text
Display translation
Thank you for your feedback