Availability:
Available in up to 3 weeks
Product details
High switching currents | Extremely low consumption |
Automatic reset function | For 12 V or 24 V battery voltage |
Product description
The Votronic Battery Protector 300 (hereinafter referred to as Battery Protector) consists of a bistable high-current relay and the control electronics.
It is a fully automatic battery protector for emergency vehicles, motor homes and marine applications. The Battery Protector protects the battery from dangerous deep discharge and the consumers from both undervoltage and overvoltage.
Alternatively, it can be used as a remotely controllable power relay ("Switch Unit") by simple external wiring.
The control electronics thus combines the functions of the well-known devices "VOTRONIC Battery Protector" and "VOTRONIC Switch Unit".
With a current consumption of less than 3 mA, the Battery Protector meets the requirements of DIN EN13976. If the Battery Protector is switched off by an external 1-pole switch, this current consumption is completely eliminated. With the supplied relay, consumers with high power ratings can be operated without any problems (permanent current carrying capacity 300 A). Regardless of the operating mode selected, the consumers are switched off immediately in the event of a defective or deeply discharged battery (U < 7.8 V).
Details
Instruction manual
It is a fully automatic battery protector for emergency vehicles, motor homes and marine applications. The Battery Protector protects the battery from dangerous deep discharge and the consumers from both undervoltage and overvoltage.
Alternatively, it can be used as a remotely controllable power relay ("Switch Unit") by simple external wiring.
The control electronics thus combines the functions of the well-known devices "VOTRONIC Battery Protector" and "VOTRONIC Switch Unit".
With a current consumption of less than 3 mA, the Battery Protector meets the requirements of DIN EN13976. If the Battery Protector is switched off by an external 1-pole switch, this current consumption is completely eliminated. With the supplied relay, consumers with high power ratings can be operated without any problems (permanent current carrying capacity 300 A). Regardless of the operating mode selected, the consumers are switched off immediately in the event of a defective or deeply discharged battery (U < 7.8 V).
Details
- Visual indication of operating status by two LEDs
- Acoustic alarm can be activated (sounds when the prewarning threshold is reached or when the device is switched off)
- Output for external alarm display (max. 0.3 A, short-circuit proof)
- Suitable for all common lead-acid battery types with 12 V or 24 V nominal voltage (acid, gel, AGM, ...)
- Suitable for lithium batteries (LiFePO4)
- Additionally usable as powerful battery main switch with protection function
- Different switching thresholds configurable
- the EMERGENCY ON function can be used to manually cancel the switch-off at any time
- Operation as switch unit:
- Can be used as a main battery switch
- Electronic delay prevents too fast reaction, e.g. in case of voltage dips due to switching on of strong consumers.
- Optical indication of the operating status by two LEDs
- Alternatively it can be used as a remote controlled power relay ("Switch Unit"), e.g. at the LCD battery computer S.
- Switching current continuous/short: 300 / 600 A
- Switching threshold undervoltage:
- at 24 V operation Values x 2: 10.6 / 11.5 / 11.8 V
- Switching threshold automatic: 9.5 - 12.2 V
- Undervoltage reset point:
- at 24 V operation Values x 2: 12.4 / 12.5 / 12.8 V
- Switching threshold automatic: 12,5
- over-voltage OFF: 15.5 V
- Dimensions (W x H x D) (incl. mounting flanges, without connections): 105 x 36 x 71 mm / 90 x 60 x 33 mm
- Mark of conformity: CE, E-testing (EMC/vehicle directive)
- Temperature range: -20 / +50°C
- Weight: 680 / 90 g
Instruction manual
Features
Type battery | Accessories |
Operating voltage | 12 and 24 V |
Design | Standard |