IVT PS 300 Power Station with integrated sine wave inverter 12 / 230 V 300 W

The mobile Power Station PS-300 offers you an independent power supply wherever it is needed: in your free time, at work, camping or in your Tiny house. No matter if you want to operate 12 V or 230 V devices on the road, with this Power Station you are well prepared for any case. Because the PS-300 has a 12 V DC and 230 V AC output. The two can be used simultaneously or separately.

The integrated 300 W sine wave inverter provides a real sine wave AC voltage. Thus, the Power Station guarantees that your sensitive consumers are operated trouble-free and safely. For example, you can always and everywhere use your laptop, set up a SAT, TV or music system, carry out minor repairs with power tools or finish the last work despite darkness with the help of a construction spotlight.

The start-up of loads up to max. 600 W with high inrush current is supported by the power start function of the integrated inverter. This makes it possible to provide chilled drinks on excursions with a mobile cooling unit.

The high-quality AGM battery 12 V/20 Ah can be recharged either via the 230 V mains or in the vehicle with 12 V. Two LEDs indicate the current status of the Power Station. The PS-300 is short-circuit proof and protected against deep discharge and overload. The mains charger and a 12 V car charger adapter are included.

Details

• Real sine wave alternating voltage 230 V/50 Hz
• Power start function
• 2 load outputs: 230 V AC and 12 V DC
• Extensive protection functions for both outputs
• High efficiency
• Robust, high-quality housing
• Sturdy carrying handle

Technical data
12 V DC output:

• Output connection 12 V automotive socket
• Maximum output current 10 A
• Maximum run time 85 min. at 10 A and full battery charge
• No-load current 4 mA (with active output)
• Deep discharge protection yes
• Fuse T 10 A (accessible from outside)

230 V AC output:

• Output connection Protective contact socket
• Output voltage 225 V AC (- 8 % / + 5 %)
• Frequency 50 Hz
• Signal form sine wave
• Continuous output current 1.4 Aeff
• Continuous output power 300 VA
• Peak output power 600 VA
• Power factor cos phi > 0.8
• Maximum run time 30 min. at 300 VA and full battery charge
• No-load current 15 mA (with active output)
• Deep discharge protection yes
• overload cut-off yes

General:

• Power supply AGM battery, 12 V, 20 Ah
• Charging via mains connection Battery trainer Pb
• (100 - 240 V AC, 50/60 Hz), max. 1.5 A
• Charging via 12 V car adapter 12 - 14.4 V DC, max. 5 A

Microprocessor-controlled electronics
The microprocessor-controlled electronics ensure fully automatic continuous monitoring and control of the most important operating parameters, such as input voltage and frequency. This ensures the constant stability of the output voltage.

Continuous power 300 W - peak output power 600 W
Especially consumers that require a high inrush current (e.g. pumps, compressors or coolers) do not always start smoothly. For this reason, the Power Station is designed to provide twice the continuous output power for a short time.

Power start function for loads with high inrush current
The integrated sine wave inverter is also equipped with the power start function. Advantage: loads with high inrush or starting current are controlled several times in quick succession with maximum output power of the inverter, thus facilitating reliable start-up of powerful loads.

Extensive protection functions for both load outputs
The Power Station operates absolutely reliably and safely even under the toughest conditions. As standard, the two outputs (230 V AC and 12 V DC) are independently protected against overload and short circuit. An imminent deep discharge of the battery is indicated by optical prewarning (LED) at both load outputs and prevented by automatic shutdown. In case of overtemperature, the integrated inverter switches off automatically.

Safe and functional: 12 V DC and 230 V AC load output
The Power Station is equipped with a 12 V DC and a 230 V AC load output as standard. The two outputs can be used separately or simultaneously.
Plug type: F, C
A 230 V safety socket, suitable for plug types C (Europlug) and F (Schuko plug), is available for drawing power.
12 V DC
In addition, the Power Station is equipped with a 12 V DC output connector.

Average operating time of electronic devices with the Power Station
The operating time of the Power Station PS-300 can vary greatly depending on which consumers are connected. With a fully charged battery, it is about 30 min at 300 W (230 V AC output) or about 85 min at 10 A (12 V DC output). If you operate consumers with lower power, the operating time is extended accordingly. If you use both outputs at the same time, it is consequently shortened.
Average operating time for electronic devices with the Power Station:

• Commercially available televisions with 102 cm screen diameter: approx. 3 h
• Stereo systems with subwoofer: approx. 3 h
• 40 W lighting: approx. 3 h
• Flash unit with 180 Ws: approx. 900 flashes

Robust housing with sturdy carrying handle
The valuable inner workings of the Power Station are protected by an extremely robust metal housing. The corners are additionally reinforced with edge protection. The sturdy carrying handle facilitates transport to the place of use.

Powerful 12 V AGM battery, 20 Ah
The Power Station is equipped with a powerful and reliable 12 V, 20 Ah AGM battery (lead-ies). Of course we offer a suitable replacement battery for this high quality device.

Scope of delivery
Power Station PS-300 230 V mains charger 12 V car charger adapter Operating instructions DE, EN, FR, NL