Product details
Reliable | Precise |
Extensive |
Product description
Details
- Real sine wave alternating voltage 230 V/50 Hz
- Flexible connection via 12 V car adapter
- Galvanic isolation of input and output stage
- Extensive protection functions
- Power start function
- E-approval
- Low power consumption
- Compact design, particularly light
Input:
- Rated voltage 12 V
- Voltage range DC
- 11 - 15 V
- Rated input current
- 12,5 A
- Input current, max. 25 A
- Deep discharge protection voltage 10.5 V
- Deep discharge protection voltage, adjustable
- no
- Prewarning deep discharge protection switch-off 11.5 V
- Restart voltage 12.5 V
- Rated power consumption, no-load 3.3 W
- Output voltage AC (- 8 % / + 5 %)
- 225 V
- Frequency (± 1 %)
- 50 Hz
- Signal shape Sine
- Continuous output current 0.67 A
- Continuous output power
- 150 VA
- Peak output power (max. 2 s) 300 VA
- Power factor cos phi > 0.8
- Rated efficiency > 88
- Input connection 12 V DC car adapter
- Output connection 1 x safety socket
- Suitable for plug type C
- Output connection USB (type A)
- no
- Temperature range -25 °C to +60 °C
- Sleep function no
- Standby function
- no
- Galvanic isolation (input/output)
- yes
- Power start function yes
- E-approval yes
- Connection for remote switch no
- Fan cooling no
The microprocessor-controlled electronics provide fully automatic continuous monitoring and control of the most important operating parameters, such as input voltage and frequency. This ensures the constant stability of the output voltage.
Continuous power 150 W - peak output power 300 W
Especially with consumers that require a high inrush current, the start does not always run smoothly. For this reason, the SW-150 is designed to provide twice the continuous output power for a short time.
To determine the appropriate inverter, you need your total power requirement. This is made up of the sum of the power (W or VA) of the individual consumers. We recommend that you allow for a power reserve of 30 - 40 % upwards.
Power start function for consumers with high inrush current
The SW inverter is also equipped with the power start function.
Advantage: Consumers with high inrush or starting current are controlled several times in quick succession with the maximum output power of the inverter, thus facilitating reliable starting of powerful consumers.
Flexible connection via 12 V car adapter
The SW-150 can be used flexibly in different vehicles. If required, the automotive adapter plug is simply plugged into the 12 V socket of the vehicle or boat, a fixed installation is not mandatory.
E-approval: Suitable for permanent installation in vehicles
The Sinus inverters meet the legal requirements of the ECE regulation and therefore have the E-certification. They are suitable for permanent installation in all vehicles with road approval, whether passenger cars, commercial vehicles or other vehicles with 12 V on-board voltage.
Galvanic isolation of input and output stage
Galvanic isolation:Thanks to galvanic isolation, there is no electrically conductive connection between the input and output circuits. Therefore, even for commercial use when only one 230 V consumer is connected, no additional personal protection device (RCD or DI switch) is required.
Extensive protection functions
SW series inverters operate absolutely reliably and safely even under the toughest conditions. They are protected against overload, short circuit and overheating as standard. Impending deep discharge of the battery is indicated by visual prewarning (LED) and prevented by automatic shutdown.
Safe output - 230 V Euro socket
Plug type: F, CThe sine wave inverter is equipped as standard with a 230 V protective contact socket, suitable for plug types C (Euro plug) and F (Schuko plug).
Compact design, particularly light
Conventional inverters are often equipped with large ring transformers. As a result, they are heavy and unwieldy. In contrast, IVT microprocessor-controlled inverters work digitally thanks to innovative technology: large, heavy components are eliminated and replaced by small and powerful components. The valuable inner workings of the inverter are protected by a sturdy housing.
The SW series inverters can be used as a stand-alone unit or mounted on a wall.
Scope of delivery
Sine wave inverter SW-150, 12 V Operating Instructions DE, EN, FR, NL
Features
Type of inverter | Pure sine-wave voltage |
Design | SW-150 |
Continuous output | 150 W |
Weight | 1,5 kg |
Dimensions (LxWxH) | 258 x 160 x 85 mm |
Output voltage | 225 V |
Input voltage | 12 V |
Peak output | 300 W |
Sockets | 1 Stück |