BioToi Dry Separating Toilet RL UTA

The most compact dry separation toilet with compost function on the market!!!

- Stainless steel housing - hygienic, aging resistant, environmentally friendly
- Bowl and lid made of polypropylene (PP-C)
- Width 332 mm, depth 385 mm, height 388 mm
- Weight: approx. 6,0 kg
- loadable up to 200 kg
- direct discharge of urine into a tank mounted under the vehicle, underfloor tank connection (UTA adapter)
- Solids tank (volume 15 liters) with agitator and removable crank (both stainless steel, crank optionally right or left without conversion)

Scope of delivery:

- Housing with bowl and lid
- Solids container with agitator
- Powerful crank handle (laser-welded stainless steel) that can be attached either on the right or on the left side
- Underfloor tank connection to drain urine directly into a tank mounted under the vehicle. This eliminates the need for a urine tank in the BioToi housing
- Siphon as odor trap
- Fan unit for automatic interval or continuous operation and integrated low-voltage protection
- Control switch for the fan unit (on / off / interval) with connection terminals and mounting material
- Fan angle 90 degrees (hose connection on housing, can be mounted either on right or left)
- 1.5 m fan hose (outer diameter 28 mm)
- 2 spray bottles (1x to clean the urine bowl and 1x to use the BioToi as a makeshift bidet)
- 1 coconut brick (drying material for use in the solids tank)
- Operating and assembly instructions

For which use is the BioToi RL UTA optimal?

By discharging the urine directly from the collection tray into a tank mounted under the vehicle, the "RL UTA" is only suitable for fixed installation. For example, to replace a previously used chemical toilet with a BioToi. By mounting the tank under the vehicle, the emptying intervals can be increased.

Note: If the BioToi is to be vented to the outside through the service flap of an existing toilet, the fan flange (not included) is usually also required. In this case, please order a fan flange at the same time to avoid reordering (delay, additional shipping costs).