Availability:
Available in up to 3 weeks
Product details
High operational reliability | Fast, battery-saving charging for long battery life |
Small, light and compact | Temperature compensation |
Product description
Fully automatic battery charger with 2 charging outputs for emergency and special vehicles, high-quality motorhomes and the marine sector.
Details
Main charge output "A", optional 3 charge programs adjustable according to battery type:
Details
- Charging programs no. 1, 2 and 4 (gel, AGM, acid) adjustable to battery type
- Excellent charging technology
- Charging voltages are free of peaks and regulated to eliminate overcharging
- Fully automatic continuous operation for batteries always ready for use
- Precise battery temperature compensation (temperature sensor required)
- Separate secondary charge output "S" for support and maintenance charging of the vehicle starter battery, max. 2A
- Automatic battery regeneration during long idle periods (twice a week)
- Compensation of voltage losses on the charging cables for exact compliance with the charging voltages
- Intelligent microprocessor control takes into account the simultaneous co-powering of consumers on the battery
- Disconnection of the batteries in case of mains failure, overheating, malfunction (safety switch per charge output)
- Silent-run function adjustable (night setback)
- Battery capacity adjustable 4 times (total of 12 charging programs)
- Inputs for voltage sensor (sense) lines, optionally usable with overlong charging lines and/or external, lossy diode charging current distributors
- Mains/charging power can be reduced in case of low-power or limited mains supply, e.g. weakly fused shore power, generator operation, etc. (power limit function)
Main charge output "A", optional 3 charge programs adjustable according to battery type:
- "AGM": Sealed, gas-tight AGM/fleece batteries VRLA (lead-fleece technology) "14.8 V".
- "Gel": sealed, gas-tight gel/dryfit batteries VRLA (fixed electrolyte)
- "Lead Acid": sealed and open acid/wet batteries and AGM with charge voltage specification "14.4 V".
- Rated voltage (AC) in [V]: 230
- Operating voltage range (AC) in [V]: 190 - 265 (full charging power)
- Power consumption (AC) in max. [W]: 1400
- Sinusoidal power factor correction (CosPhi = 1): yes
- Nominal battery voltage (DC) in [V]: 12
- Battery capacity in [Ah]: 150 - 880
- Charging current in [A]: 80
- Secondary charge output "S" in [A]: 2
- Charging characteristic: IU1oU2
- Voltage limitation for all charge modes/programs [V]: 15
- Voltage ripple in [mV]: rms < 50
- Number of charge outputs: 1 + S
- Device mounting position: any
- Temperature range [°C]: -20 to +45
- Degree/class of protection: I / IP 21
- Dimensions incl. mounting flanges/feet, without connections: 333 x 262 x 92 mm
- Ambient conditions, humidity: max. 95% room humidity, non-condensing
- Automatic battery regeneration
- Connection remote control/display
- Battery capacity (size) adjustable
- Power limit function (mains/charging power reduction)
- Silent Run function (night setback)
- Temperature compensation
- Voltage sensor (for very long charging cables)
- Mains cable
- Operating instructions
Features
Type battery | Charger |
Weight | 3,9 kg |
Charging current | 80 A |
Operating voltage | 12 V |
Design | Standard |