Lily lifting system for shower and waste water
Availability:
Available in up to 2 weeks
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
Product details
| Compact design | Made from certified LILIE materials |
| Low power consumption | Sufficient conveying capacity |
Product description
This solution takes shower and waste water and automatically pumps it into the waste water tank, even if it is at a higher level.
In this case, the drain pump is equipped with an automatic level switch.
As soon as this switch registers the entry of water, the pump starts pumping until everything is pumped out, then the level switch switches the pump off again
the level switch switches the pump off again.
An integrated non-return valve prevents the pumped water from flowing back.
Two dirt strainers protect the pump from heavy contamination and malfunction.
The collection tank holds up to 4 liters of liquid. It is made of plastic with a tightly closing clear
Transparent lid, which can be opened and closed quickly and easily, e.g. for cleaning.
The housing offers the possibility of several inlets (19/25mm and 30/40mm) for the use of different inlet hoses;
for the outlet there is a tapping connection which can be used for several cross-sections (19/25mm).
A vent connection and a provided cable feed-through ensure easy start-up and reliable operation.
Special drain/suction pump for:
In this case, the drain pump is equipped with an automatic level switch.
As soon as this switch registers the entry of water, the pump starts pumping until everything is pumped out, then the level switch switches the pump off again
the level switch switches the pump off again.
An integrated non-return valve prevents the pumped water from flowing back.
Two dirt strainers protect the pump from heavy contamination and malfunction.
The collection tank holds up to 4 liters of liquid. It is made of plastic with a tightly closing clear
Transparent lid, which can be opened and closed quickly and easily, e.g. for cleaning.
The housing offers the possibility of several inlets (19/25mm and 30/40mm) for the use of different inlet hoses;
for the outlet there is a tapping connection which can be used for several cross-sections (19/25mm).
A vent connection and a provided cable feed-through ensure easy start-up and reliable operation.
Special drain/suction pump for:
- Showers
- Washbasins/tables
- Sinks
- Fresh/waste water tanks
- Especially for higher waste water tanks
- Voltage range: 10-16 V
- Inlets: 19mm, 19/25mm, 30/40mm
- Drain: 19/25mm
Features
| Type of water pump | Bilge pump |
| Type of water pump | Water pump |
| Type of water pump | Immersion pump |
| Max. pressure | Max. power consumption |
| Colour | gray/ yellow |
| Dimensions (LxWxH) | 334 x 215 x 112 mm |
Our service
Order hotline
+49 (0)9181 / 330 100Mon. - Sat.: 8:00 - 20:00 hrs
Specialist advice
ARRANGE CALLBACKMon. - Fri.: 9:00 - 16:00 o'clock
Secure payment with SSL encryption
Free return
Up to 5% bonus with the Berger advantage card
