Drainage Sets
Drain Sets are essential for a clean, efficient water installation in caravans and motorhomes. With the right low-point drains, inline valves and quick-connect couplers, you can empty fresh and grey-water lines fast, prevent frost damage and keep your system hygienic trip after trip.
Read more about Drainage Sets ...
Drain Sets
A dependable drain set helps you empty tanks and lines quickly, protect components from frost and keep your caravan or motorhome water system hygienic. Choose compatible valves, fittings and connectors to make draining simple at the pitch and during winter storage.
Caravan And Motorhome Drain Sets Basics
Start by placing low-point drains at the naturally lowest sections of your pipe runs. This ensures water flows out completely when opened, reducing stagnation and frost risk. Keep diameters consistent with your main lines to maintain fast, unrestricted draining.
Low-Point Drain Sets For Complete Emptying
Fit manual or lever valves at the lowest points of fresh and hot water circuits. Position them where they remain accessible so you can drain lines before driving or storing the vehicle.
Quick-Drain Couplers For Faster Setups
Add quick-connects at service points to speed up routine draining and to simplify appliance changes. Colour-coding hot and cold runs helps avoid mistakes during maintenance.
Fresh Water Drain Sets And Valves
For drinking water, choose food-grade materials and smooth-bore fittings that won’t trap residue. Inline drain valves near tanks and heaters let you purge sections individually without opening every tap.
Inline Drain Valves For Fresh Lines
Install compact valves close to appliances so you can isolate and drain a single branch. This saves time at the campsite and limits water waste.
Hygiene And Flushing With Drain Sets
Periodic flushing through the drain set helps remove air locks and sediment. After disinfecting, use the drains to purge cleaning agents thoroughly.
Waste Water Drain Sets And Pipe Systems
Grey-water drain sets should maintain a gentle fall to avoid standing water and smells. Use temperature-resistant hose or pipe and secure with clips at regular intervals for quiet, drip-free operation.
Odour Control In Drain Sets
Add traps near sinks and keep tank vents clear so drains run smoothly without gurgling. Caps and plugs help contain odours while travelling.
Hose Routing For Drain Sets
Avoid sharp bends and long horizontal runs that slow drainage. Where turns are unavoidable, use 45° or 90° elbows to preserve flow.
Frost Protection With Drain Sets
In cold conditions, low-point drains are your first defence against burst pipes. Pair them with thermostatic frost valves near heaters so lines empty automatically when temperatures drop.
Automatic Frost Valves For Drain Sets
These open at preset temperatures to drain vulnerable sections, protecting pumps, heaters and fittings from ice damage.
Winterising Checks For Drain Sets
Before storage, open all drain sets, set mixer taps to the mid position and leave lines open until dry. Cap external inlets to keep debris out.
Installing Drain Sets And Connections
Match inner and outer diameters across pipes, hoses and fittings. When threads are used, confirm BSP type and seal with appropriate gaskets or PTFE tape. Keep adapters to the minimum to reduce restriction and potential leak points.
Thread Types And Sealing For Drain Sets
Verify male/female orientation and avoid overtightening to protect seats and O-rings. Deburr pipe ends and push fully home on push-fit systems.
Leak Testing After Fitting Drain Sets
Pressure-test after installation, then check again after the first drive. Replace worn O-rings and keep spare clamps and a universal connector in your toolkit.
Maintaining Your Drain Sets On The Road
Carry a few spare O-rings, caps and a short length of hose for quick fixes. Regular cleaning and occasional in-line filtration help maintain taste, pressure and reliability throughout the season.
