Berger Touring Easy bus awning
Necessary accessories
Product details
| Front wall with clear film window | Side wall with second entrance | for vehicles with a gutter height of 180 - 220 cm | Fast assembly |
Product description
Additional storage space with the Berger Touring Easy bus awning
If you are traveling with a van or panel van, a bus awning is a good way to create more living and storage space.
The Berger Touring Easy is suitable for vehicles with a rain gutter height of 180 - 200 cm. The interior height is 205 cm. The bus awning is free-standing so that the vehicle can simply be driven away without dismantling the awning.
Poles: 2 fiberglass poles Ø 12.7 mm, 2 aluminium roof poles Ø 19 mm, 2 steel pitching poles Ø 16 mm, 1 steel airlock pole Ø 19 mm.
Front wall:
- Entrance can be rolled up and opened out as a sun canopy
- Clear film window (can be closed opaque from the inside)
Side walls:
- Left and right side walls with 1/2 mosquito gauze and 1/2 clear film window (can be closed opaque from the outside)
- right side wall with entrance (can be rolled up and opened as a sun canopy)
Rear wall:
- can be rolled away to the side (with zipper), incl. windbreak
- connecting airlock with hemstitch for airlock pole
general features:
- Tape-sealed seams
- Double covered zippers
- Additional roof poles for more stability
Features
| Type of caravan and mobile home awning | Camper awning |
| Colour | anthracite |
| Frame | Fiberglass (Ø12.7 mm), aluminum (Ø19 mm), steel (Ø19/16 mm) |
| Weight | 12,8 kg |
| Material | 100 % polyethylene |
| Installed height (min.-max.) | 180 - 220 cm |
| Dimensions (WxD) | 250 x 320 cm |
| Pack size (LxWxH) | 63 x 22 x 22 cm |
| ean | 4036231080715 |
Legal information
Manufacturer information
Fritz Berger GmbH
Dr. Matthias Herfeld
Fritz-Berger-Strasse 1
92318 Neumarkt
Germany
customer-service@berger-camping.com
Necessary accessories
Article characteristics
Double covered zippers
Provide additional wind and rain protection at entrances and windows.
Lightweight fiberglass frame
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments...
Read more
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments are connected by a rubber band, thus facilitating assembly Advantage: weight saving.
Taped seams
An adhesive tape provides additional protection for all seams and prevents the...
Read more
An adhesive tape provides additional protection for all seams and prevents the penetration of moisture.
Mosquitogaze
Protection from insects and other small animals. Also serves for air circulation.
Water column 3.000 mm
The water column provides information about the material tightness. To...
Read more
The water column provides information about the material tightness. To determine the millimetre value, 10 cm of fabric is stretched under a measuring cylinder and the cylinder is filled with water from above. The limit value at which water droplets press through the material is the maximum water column. In Germany, a tent outer material is considered waterproof from 1500 mm.
Camper
Suitable for camping buses.
