DINITROL 4010 Heat-Resistant Corrosion Protection, Transparent Beige, 500 ml
DINITROL 4010 Heat-Resistant Corrosion Protection, Transparent Beige, 1 Liter
Product details
| Bitumen-Based Underbody and Corrosion Protection | Hard, transparent, and non-sticky protective film | Corrosion Protection for Engines and Surfaces | Available in a 500-ml spray can and a 1-liter can |
Product description
Heat-Resistant Protection for Engines and Surfaces
DINITROL 4010 is a transparent corrosion inhibitor for engines, engine compartments, and other surfaces exposed to high temperatures. Once dry, the product forms a hard, non-sticky hard-wax film that largely preserves visibility of treated surfaces, markings, and components. The manufacturer also recommends its use on suitable electrical installations.
Details
- Suitable for engines and engine compartments
- Can be used in open and enclosed areas
- Suitable for components exposed to high temperatures
- Also intended for use on suitable electrical installations
- Hard, transparent hard wax film
- Non-sticky surface after drying
- Resistant to acids and bases
- Apply to clean, dry, and corrosion-free surfaces
- Recommended application temperature: approx. 15 to 30 °C
- Not recommended for recoating
Technical Data
- Product type: Surface and engine corrosion protection
- Model: 4010 / 4010 Corroheat
- Base material: Alkyd resin
- Color: transparent beige
- Film type: Hard wax, hard and non-sticky
- Density at 23 °C: approx. 890 kg/m³
- Solids content: approx. 47% by weight
- Recommended wet film thickness: approx. 120 µm
- Recommended dry film thickness: approx. 40 µm
- Drying time: approx. 4 to 6 hours at 23 °C and 50% relative humidity
- Cold stability: down to approx. -30 °C
- Short-term heat resistance: up to approx. 200 °C
- Long-term heat resistance: up to approx. 160 °C
- Can be painted over: not recommended
500 ml spray can
- Container type: aerosol can
- Capacity: 500 ml
- Net weight of contents: approx. 0.368 kg
- Gross weight: approx. 0.467 kg
1-liter can
- Container type: Can / P7 bottle
- Volume: 1 liter
- Net weight: approx. 0.890 kg
- Gross weight: approx. 1.023 kg
Contents
- 1x DINITROL 4010 Corrosion Inhibitor in the selected version
Features
| Colour | transparent beige |
| Filling quantity | 500 ml |
| ean | 4046085112500 |
| Manufacturer Article No. | 101 08948 |
Features
| Colour | transparent beige |
| Filling quantity | 1 l |
| ean | 4046085112494 |
| Manufacturer Article No. | 101 08947 |
Legal information
Hazard warnings
Danger
H222 - Extremely flammable aerosol.
H229 - Pressurized container: may burst when heated.
H336 - May cause drowsiness and dizziness.
H372 - Causes damage to organs (state all organs affected) through prolonged or repeated exposure (state route of exposure if there is conclusive evidence that no other routes of exposure cause the hazard).
H412 - Harmful to aquatic organisms, with long lasting effects.
General Safety Information
Manufacturer information
GUG Vertriebs-GmbH
Von-Braun-Str. 21
48683 Ahaus
Germany
info@gug-ahaus.de
Legal information
Hazard warnings
Danger
H226 - Flammable liquid and vapor.
H304 - May be fatal if swallowed and enters the respiratory tract.
H336 - May cause drowsiness and dizziness.
H372 - Causes damage to organs (state all organs affected) through prolonged or repeated exposure (state route of exposure if there is conclusive evidence that no other routes of exposure cause the hazard).
H412 - Harmful to aquatic organisms, with long lasting effects.
General Safety Information
Manufacturer information
GUG Vertriebs-GmbH
Von-Braun-Str. 21
48683 Ahaus
Germany
info@gug-ahaus.de
