Gordigear roof tent DAINTREE 140cmGordigear roof tent DAINTREE 165cmGordigear roof tent DAINTREE 180cmGordigear roof tent DAINTREE 220cm
Article characteristics
Article characteristics
Article characteristics
Article characteristics
Product details
| flexible assembly | Tropical roof design |
Product description
Gordigear combined 25 years of experience in tent development and thousands of customer feedbacks from all over the world to develop the next evolutionary stage of folding roof tents, the Gordigear Daintree.
The name is a tribute to the national park of the same name in the north of Australia and for this product it was once again a top priority that the end result should withstand the extreme weather and climatic conditions of the red continent.
Whether extreme temperature fluctuations, heavy rain, wind, UV radiation or snow, with the Daintree you are optimally equipped - no matter where and when you are traveling.
The tent itself is made from real canvas, dip-impregnated and double-stitched and taped with German Amann thread.
A covered entrance provides sheltered access even in rainy weather. A wide panoramic window in the covered entrance area acts as an extractor hood and allows you to cook in the optional awning without steam and odors escaping through the sleeping area.
The high-quality construction of genuine canvas, aluminum and stainless steel offers market-leading quality, including storm struts developed in Germany. The newly developed floor consists of a honeycomb construction.
The specially incorporated air chambers result in unique insulating properties without cold bridges.
GORDIGEAR INNOVATION
The 25 mm thick, convex tent poles increase stability in strong winds and snow pressure by 65% compared to the standard market design and allow precipitation to run off more quickly.
The bright and friendly interior is also full of innovations, with four ventilation vents to reduce condensation and ensure excellent airflow, even in rainy weather.
GORDIGEAR INNOVATION
The vents can be closed individually and allow the use of a tent heater without heat loss through the ventilation openings.
The tropical roof provides an insulating layer of air above the tent, preventing heat build-up. Even in the blazing sun, the sauna effect familiar from conventional tents is prevented.
A unique feature of the Daintree is the tropical roof design: to keep the tent quiet even in windy conditions, the tropical roof fits snugly against the main tent to repel the wind, is fastened with 17 quick-release fasteners and is made from a very quiet and tear-resistant poly fabric with a ripstop weave.
The comfortable 80 mm foam mattress with removable cover, the vapor barrier developed by Gordigear and a 10 mm anti-condensation mat with additional cushioning ensure sleeping comfort just like in your own bed.
GORDIGEAR INNOVATION
The innovative window design is designed for maximum flexibility and stability. A two-part trapezoidal shape maximizes the window area for a bright interior. Each side window is split in two and can therefore be adapted precisely to the respective weather conditions.
The canvas strut between the window sides dissipates forces under extreme loads and provides additional stability.
Further features:
- flexible installation - the entrance can be attached to the side or above the rear of the vehicle
- both entrances are fitted with separate mosquito nets and covers
- Tent design allows storage of bedding or sleeping bags when folded up
- Telescopic ladder for car heights up to 2 m (can be extended as required using extension elements)
- Ladder with flat rungs can also be climbed barefoot
- hard-wearing travel cover made of 1000D polyvinyl chloride (PVC); zipper protects the contents from rain and dust and prevents the cover from inflating while driving
- Elastic bands support folding of the tent side walls
- Mosquito nets even offer protection from sand flies and the smallest mosquitoes
- four storage compartments keep the tent tidy
- universal fastening system compatible with most commercially available roof racks (please check the maximum permissible static and dynamic loads of your roof rack)
- Cable inlets on both sides
Features
| Type roof tent | Folding roof tent |
| Design | 140cm cm |
| Number of people | 2-person tent |
| Mattress | 230 x 140 cm cm |
| Width inside | 140 cm |
| Colour | stone gray |
| Frame | anodized aluminium frame |
| Weight | 64 kg |
| Dimensions (LxW) | 320 x 140 cm |
| Dimensions (LxWxH) | 320 x 140 x 130 cm |
| Pack size (LxWxH) | 120 x 144 x 35 cm |
| Material | 320 gr/m² ripstop polyester-cotton blend; waterproof, polyurethane-impregnated and UV-resistant |
| ean | 2003013010002 |
| Manufacturer Article No. | DRT14 |
Features
| Type roof tent | Folding roof tent |
| Design | 165cm |
| Number of people | 2-3 Personen Zelt |
| Mattress | 230 x 165 cm |
| Colour | stone gray |
| Frame | anodized aluminium frame |
| Weight | 80 kg |
| Dimensions (LxW) | 320 x 165 cm |
| Dimensions (LxWxH) | 320 x 165 x 130 cm |
| Pack size (LxWxH) | 120 x 169 x 35 cm |
| Material | 320 gr/m² ripstop polyester-cotton blend; waterproof, polyurethane-impregnated and UV-resistant |
| ean | 4262466970129 |
| Manufacturer Article No. | DRT16 |
Features
| Type roof tent | Folding roof tent |
| Design | 180cm |
| Number of people | 3-person tent |
| Mattress | 230 x 180 cm |
| Colour | stone gray |
| Frame | anodized aluminium frame |
| Weight | 90 kg |
| Dimensions (LxW) | 320 x 180 cm |
| Dimensions (LxWxH) | 320 x 180 x 130 cm |
| Pack size (LxWxH) | 120 x 184 x 35 cm |
| Material | 320 gr/m² ripstop polyester-cotton blend; waterproof, polyurethane-impregnated and UV-resistant |
| ean | 2005473260003 |
| Manufacturer Article No. | DRT18 |
Features
| Type roof tent | Folding roof tent |
| Design | 220cm |
| Number of people | 4-person tent |
| Mattress | 230 x 220 cm |
| Colour | stone gray |
| Frame | anodized aluminium frame |
| Weight | 105 kg |
| Dimensions (LxW) | 320 x 220 cm |
| Dimensions (LxWxH) | 320 x 220 x 130 cm |
| Pack size (LxWxH) | 120 x 224 x 35 cm |
| Material | 320 gr/m² ripstop polyester-cotton blend; waterproof, polyurethane-impregnated and UV-resistant |
| Height inside | 130 cm |
| ean | 2003423390008 |
| Manufacturer Article No. | DRT22 |
Legal information
Manufacturer information
Gordigear GmbH
Gartenstr. 47
83410 Laufen
Germany
fpuffer@gordigear.com
Legal information
Manufacturer information
Gordigear GmbH
Gartenstr. 47
83410 Laufen
Germany
fpuffer@gordigear.com
Legal information
Manufacturer information
Gordigear GmbH
Gartenstr. 47
83410 Laufen
Germany
fpuffer@gordigear.com
Legal information
Manufacturer information
Gordigear GmbH
Gartenstr. 47
83410 Laufen
Germany
fpuffer@gordigear.com
Article characteristics
IMTEST Testsieger
Voted best model for camping on the car roof by IMTEST. Read
Voted best model for camping on the car roof by IMTEST. Read the IMTEST test report now and see for yourself. Gordigear stands for solid quality and has over 20 years of experience in the development of roof tents.
Article characteristics
IMTEST Testsieger
Voted best model for camping on the car roof by IMTEST. Read
Voted best model for camping on the car roof by IMTEST. Read the IMTEST test report now and see for yourself. Gordigear stands for solid quality and has over 20 years of experience in the development of roof tents.
Article characteristics
IMTEST Testsieger
Voted best model for camping on the car roof by IMTEST. Read
Voted best model for camping on the car roof by IMTEST. Read the IMTEST test report now and see for yourself. Gordigear stands for solid quality and has over 20 years of experience in the development of roof tents.
Article characteristics
IMTEST Testsieger
Voted best model for camping on the car roof by IMTEST. Read
Voted best model for camping on the car roof by IMTEST. Read the IMTEST test report now and see for yourself. Gordigear stands for solid quality and has over 20 years of experience in the development of roof tents.
