Quattro EGO400 Titanium Maneuvering Aid for Trailers with Motor A and Motor B
Item no: 664211
685,- €
Prices incl. statutory VAT,
free shipping
Get up to 5% Bonus with the Berger Loyalty Card
€ Bonus with the Berger Loyalty Card
Availability:
Delivered within 3-5 working days
Product details
| Electric shunting aid with two 12-V motor units | Suitable for single-axle and double-axle trailers | Precise directional control via radio remote control | Can be upgraded to a four-motor all-wheel-drive system for tandem-axle vehicles |
Product description
Maneuvering a Trailer with Control in Tight Spaces
With the Quattro EGO400 Titanium maneuvering aid, you can move your trailer forward, backward, and around corners with precision. The two motorized drive rollers transmit power directly to the tires, while you comfortably control the direction of travel using a wireless remote control. The system is suitable for single-axle and tandem-axle trailers and makes it easier to position your trailer at campsites, in driveways, or in tight parking spaces.
Details:
With the Quattro EGO400 Titanium maneuvering aid, you can move your trailer forward, backward, and around corners with precision. The two motorized drive rollers transmit power directly to the tires, while you comfortably control the direction of travel using a wireless remote control. The system is suitable for single-axle and tandem-axle trailers and makes it easier to position your trailer at campsites, in driveways, or in tight parking spaces.
Details:
- Two motor units to drive the left and right sides of the trailer
- Basic electronics for controlling maneuvering movements
- Manual cross-activation system applies both drive rollers to the tires simultaneously
- Included 19-mm tool for swinging the drive rollers in and out
- Remote control enables forward and reverse movement as well as precise directional changes
- Turning in place is possible with a single-axle trailer
- Suitable for installation in front of or behind the trailer wheels
- Included chassis clamps fit many standard L- and U-shaped frames
- Additional mounting adapters may be required for non-standard chassis shapes
- On a tandem-axle trailer, can be expanded to a four-motor all-wheel-drive system using a second Mover system
- Installation, wiring, and adjustment must be performed properly in accordance with the installation instructions
- Check and maintain the drive rollers, fasteners, and electrical connections regularly
- Number of drive motors: 2
- Drive roller operation: Manual with cross-control
- Electronic system: Basic electronics
- Suitable for: Single-axle and double-axle travel trailers
- Maximum trailer weight on a 15% grade: 2,300 kg
- Operating voltage: 12 V DC
- Average current draw: approx. 25 A
- Maximum continuous current draw: 120 A
- Speed: approx. 12 cm/s
- Installed weight: 36.2 kg
- Suitable vehicle width: 1,800 to 2,500 mm
- Distance between roller and tire when fully extended: 20 mm
- Required power supply battery: 12 V, at least 85 Ah, not included
- Remote control batteries: 2x 1.5 V AAA, included
- 1x Quattro EGO400 Motor Unit A
- 1x Quattro EGO400 Motor Unit B
- 1x Main crossbar
- 1x Center bar for cross-control
- 2x Insertion rods for cross-actuation
- 1x 19-mm actuation tool
- 1x Basic control unit
- 1x Basic wireless remote control
- 1x antenna
- 1x data cable
- 1x wrist strap for the remote control
- 2x 1.5-V AAA batteries
- 1x 120-A fuse
- 1x fuse holder
- 1x Battery disconnect switch with key and mounting hardware
- 1x wiring harness for motors and supply battery
- 1x chassis mounting kit
- 2x 20-mm spacers
- 1x Mounting and connection hardware
Features
| Type of manoeuvring aid | Manoeuvring aid |
| Max. total weight | 2300 kg |
| Weight | 36,2 kg |
| Climbing ability max. | 15% |
| Design | Motor A and Motor B |
| ean | 2006642110006 |
| Manufacturer Article No. | EGO400-003 |
Legal information
Manufacturer information
Fritz Berger GmbH
Fritz-Berger-Str. 1
92318 Neumarkt
Germany
backoffice@fritz-berger.de
