Teroson WX 215 cavity wax with high creep properties for corrosion protection 500 ml
Product details
| Extremely high creep capacity for optimum cavity protection | Forms a tough, water-repellent protective film after drying | Suitable for many substrates such as pvc, bitumen/rubber or rubber/resin | Fine atomization with spray tube for hard-to-reach areas |
Product description
Teroson WX 215 - highly creepable cavity wax for long-lasting corrosion protection
With Teroson WX 215, you can reliably protect hard-to-reach vehicle areas against corrosion. The low-viscosity cavity wax has extremely high creeping properties, displaces moisture and even reaches narrow gaps between sheet metal thanks to its fine atomization. You can apply it to existing coatings such as pvc, pvc wax, bitumen/rubber or rubber/resin. After drying, it forms a tough, water-repellent film and is suitable for small repair areas as well as underbody and interior areas. The product is resistant to high temperatures and is applied using a spray head or the enclosed spray tube. Due to the flammable propellant gas, the area must be well ventilated during drying.
Details:
- Product type: Cavity wax and corrosion protection agent for cavity preservation
- Basis: Waxes, polymers and rust protection additives
- Extremely high creeping ability, displaces moisture
- Suitable for small repair areas and additions to existing sealants
- Application in doors, engine compartment, sills and weld seams
- Can be applied to pvc, pvc wax, bitumen/rubber and rubber/resin
- Forms a tough, water-repellent protective film after drying
- Fine atomization for even coating of hard-to-reach areas
- Application possible from 10 °C, ideal creep behavior at room temperature
- Spray tube for narrow cavities included in the lid
- Clean fresh residues with Teroson vr 10
- Material can become thixotropic when stored below 15 °C
- Drying can take several days depending on the cavity
- Rubber, plastic and functional parts must not be sprayed
- Normal hazardous goods in the form of pressurized gas packs
Technical data:
- Color: Light brown, almost translucent
- Density: approx. 0.72 g/cm³
- Solid content: approx. 40 %
- Dropping point of the solid: 60 °C
- Penetration: >20 mm
- Maximum stability: 100 µm
- No corrosion in salt spray test (DIN 50021, 240 h, 50 µm layer)
- Processing temperature: 15 to 25 °C
- Service temperature: -40 to 90 °C, short-term up to 100 °C
- Shelf life: 18 months
Scope of delivery:
- 1x Teroson WX 215 cavity wax 500 ml spray can
Features
| Colour | light brown / transparent |
| ean | 4002872155716 |
| Manufacturer Article No. | 794224 |
Legal information
Hazard warnings
H222 - Extremely flammable aerosol.
H229 - Pressurized container: may burst when heated.
H317 - May cause allergic skin reactions.
H336 - May cause drowsiness and dizziness.
H411 - Toxic to aquatic organisms, with long lasting effects.
Manufacturer information
Henkel AG & Co. KGaA
Henkelstr. 67
40589 Düsseldorf
Germany
thomas.holzer@henkel.com



























