Wentronic SCC 30 Solar charge controller
Wentronic SCC 15 Solar charge controller
Product details
| intuitive user interface | uncomplicated setting and monitoring | Maximum efficiency | Reverse polarity protection | Robust aluminum housing |
Product description
Harness the power of the sun! Thanks to the advanced MPP technology, the solar energy generated is efficiently transferred to the battery so that every ray of sunshine can be optimally utilized. In conjunction with the connected display, the solar charge controller offers an intuitive user interface that makes setting and monitoring uncomplicated. This means you are always in control and can rely on optimum results.
Details
- Maximum efficiency thanks to MPP technology (Maximum Power Point)
- Connectable display via CI-BUS
- Robust aluminum housing
- Available in variants with 460 Wp / 250 Wp
- Compatible with all common battery types
- Charging of on-board and starter battery
- Reverse polarity protection on the automotive connector
- Charge management for trickle and top-up charging
- LCD status display shows charging current, generated energy, power or battery voltage
- External input for battery temperature sensor
- The power efficiency or efficiency of the MPP solar controller is > 97 %
- Battery compatibility: Lead-acid, GEL, AGM, LiFePO4 batteries
- Solar panel: Max. Voltage 50 V
- Starter battery: Max. Charging current 1 A at 12 V
- Solar module current max:
- SSC30: 30 A
- SSC15: 15 A
MPP technology
Maximum Power Point Tracking (MPP) is a process in which the electrical load of a solar module is determined and optimized. A microprocessor uses the MPP of the module and determines the maximum power yield of the solar system at extremely short intervals. The processor transforms the excess voltage into a higher charging current according to the connected battery type. This additional charging current ensures shorter charging times and the best possible power utilization of the solar system.
CI-BUS system
The CI-BUS system is the industry standard for the safe and central operation and display of components in motorhomes. Modern CI-BUS on-board management systems centrally control the devices and functions in the entire on-board network, such as lighting, charge/level indicators or air conditioning. Wentronic Solutions GmbH is a member of the CIVD and an official CI-BUS partner.
Features
| Design | SSC 30 |
| Width | 105 mm |
| Weight | 300 g |
| Height | 35 mm |
| Length | 130 mm |
| Output | 460 Wp |
| ean | 4040849659096 |
| Manufacturer Article No. | 65909 |
Features
| Design | SSC 15 |
| Width | 105 mm |
| Weight | 300 g |
| Height | 35 mm |
| Length | 130 mm |
| Output | 250 Wp |
| ean | 4040849659102 |
| Manufacturer Article No. | 65910 |
Legal information
Manufacturer information
Wentronic GmbH
Pillmannstraße 12
38112 Braunschweig
Germany
office@wentronic.com
Legal information
Manufacturer information
Wentronic GmbH
Pillmannstraße 12
38112 Braunschweig
Germany
office@wentronic.com
Note
Please note: since our deliveries may contain batteries (single-use and rechargeable),
according to the German Law on Batteries (BattG) we must advise you of the following:
single-use and rechargeable batteries must not be disposed of along with domestic waste, but rather you are legally required to return used batteries. Used batteries may contain damaging substances which, if not stored or disposed of appropriately, may damage the environment or your health. Batteries may, however, also contain important raw materials, such as, for example, iron, zion, magnesium or nickel, which can be recycled. Once used, you may either send the batteries back to us, or return them in
your vicinity (e.g. at the shop, communal recycling points or at our expedition warehouse) - free of charge. When returning used batteries to points of sale, the quantity you are allowed to return is limited to the quantity typical for a single end user, and to those batteries which the seller offers or used to offer in their product range.
The symbol with a rubbish bin crossed out means that you must not dispose of single-use and rechargeable batteries
along with the domestic waste. Underneath this symbol you will also find the following symbols which have the following
meanings:
Pb: battery contains lead
Cd: battery contains cadmium
Hg: battery contains mercury
Return address:
Fritz Berger GmbH
Fritz-Berger-Str. 1
D - 92318 Neumarkt
Note
Please note: since our deliveries may contain batteries (single-use and rechargeable),
according to the German Law on Batteries (BattG) we must advise you of the following:
single-use and rechargeable batteries must not be disposed of along with domestic waste, but rather you are legally required to return used batteries. Used batteries may contain damaging substances which, if not stored or disposed of appropriately, may damage the environment or your health. Batteries may, however, also contain important raw materials, such as, for example, iron, zion, magnesium or nickel, which can be recycled. Once used, you may either send the batteries back to us, or return them in
your vicinity (e.g. at the shop, communal recycling points or at our expedition warehouse) - free of charge. When returning used batteries to points of sale, the quantity you are allowed to return is limited to the quantity typical for a single end user, and to those batteries which the seller offers or used to offer in their product range.
The symbol with a rubbish bin crossed out means that you must not dispose of single-use and rechargeable batteries
along with the domestic waste. Underneath this symbol you will also find the following symbols which have the following
meanings:
Pb: battery contains lead
Cd: battery contains cadmium
Hg: battery contains mercury
Return address:
Fritz Berger GmbH
Fritz-Berger-Str. 1
D - 92318 Neumarkt
