Berger remote control for Berger SW and BRSW sine wave inverters
Benjamin D.
Test report from 07.11.2026
In welchem Fahrzeug hast du die Fernbedienung für Wechselrichter verbaut?
„We installed the inverter in our 7-meter Eura Mobil motorhome with an alcove.“
An welchem Wechselrichter hast du die Fernbedienung angeschlossen?
„We connected the remote control to the Berger SW 1000 Sine Wave Inverter.“
Wie gut ließ sich der Einbau der Fernbedienung bewerkstelligen?
„Installation was easy. First, I had to choose a suitable spot in the RV. The kit includes a 5-meter cable for the remote control, so the installation location can be chosen quite flexibly. However, since I wanted to run the cable out of sight, I chose a spot near the inverter. By drilling a hole toward the rear garage, I ran the cable directly to the inverter installed there. I then screwed the remote control to the wall inside the camper. The connection is very easy, and the remote control is ready for use right away. Thanks to the RJ12 connectors, it’s impossible to plug it in incorrectly.“
Wie zufrieden bist du mit der Anzeige?
„The display is large and easy to read. The backlight is bright, making it easy to read the display even in daylight. The displays let you keep a close eye on the inverter’s operating point and the battery level at all times. I like that the display can be turned off at night.“
Overall impression:
„Installing the remote control was easy. I can now conveniently turn on the inverter from the living area. Before that, I always had to turn on the inverter in the rear garage, and the power button wasn’t always easy to reach. The displays help you keep an eye on the load and the battery level while the inverter is running. I’m very satisfied with the remote control.“
