Büttner Dometic bead filler set MT 12100 consisting of 2 aluminum plates for Fiat Ducato
Item no: 292660
23,99 €
Prices incl. statutory VAT,
plus shipping
Get up to 5% Bonus with the Berger Loyalty Card
€ Bonus with the Berger Loyalty Card
Availability:
Delivered within 3-5 working days
Product details
| Enables the safe installation of solar modules on van roofs | Creates a continuous adhesive surface and reduces wind noise | Simple fastening with Sikaflex for optimum hold | Specially pre-treated aluminum plates for better adhesion |
Product description
Dometic Büttner MT 12100 bead filler set
Many panel vans, such as the Fiat Ducato, have beads on the roof that provide stability, but no continuous adhesive surface for mounting solar modules or carrier profiles. This can be particularly problematic in the front area, as there is not enough adhesive surface and wind noise can occur. The bead filler set solves this problem with two specially pre-treated aluminum plates that are glued into the recesses. The bracket or the Flat Light solar module can then be attached to the flat surface. No bead filler should be used in the rear area so that water can drain away unhindered.
Details:
Many panel vans, such as the Fiat Ducato, have beads on the roof that provide stability, but no continuous adhesive surface for mounting solar modules or carrier profiles. This can be particularly problematic in the front area, as there is not enough adhesive surface and wind noise can occur. The bead filler set solves this problem with two specially pre-treated aluminum plates that are glued into the recesses. The bracket or the Flat Light solar module can then be attached to the flat surface. No bead filler should be used in the rear area so that water can drain away unhindered.
Details:
- Enables secure mounting of solar modules on van roofs
- Particularly suitable for the Fiat Ducato and similar models
- Prevents wind noise thanks to a smooth adhesive surface in the front roof area
- Simple adhesive attachment with Sikaflex (included in the solar module set)
- Sandblasted, pre-treated surface for optimum adhesion
- Contains two aluminum plates
- Additional sets required depending on module width and positioning
- Material: aluminum
- Color: white
- Dimensions (L x W x H): 5.5 × 9 × 1 cm
- Weight: 0.16 kg
- Packaging dimensions (W x H x D): 55 x 13 x 90 mm
- 2 aluminum plates
Features
| Type of adhesive, sealant | Hybrid adhesive |
| ean | 4260397962664 |
| Manufacturer Article No. | MT12100 |
Legal information
Hazard warnings
Danger
H222 - Extremely flammable aerosol.
H223 - Flammable aerosol.
H224 - Extremely flammable liquid and vapor.
H225 - Highly flammable liquid and vapor.
H226 - Flammable liquid and vapor.
H227 - Flammable liquid.
H228 - Flammable solid.
H229 - Pressurized container: may burst when heated.
General Safety Information
Manufacturer information
Dometic Mobile Power Germany GmbH
Hollefeldstr. 63
48282 Emsdetten
Germany
info@dometic.com
