Liqui Moly stone chip protection coating spray can 500 ml

Stone chip protection coating - Elastic protection for vehicle parts

With this stone chip protection coating based on rubber and resins, you can reliably protect visible vehicle parts, chassis and body parts against stone chips, corrosion, weather, salt spray and abrasion.
The coating dries quickly, remains permanently elastic after complete drying, has a sound-absorbing effect and can be painted over with commercially available paint systems and sanded well after complete drying.

Details:

• Very good adhesion to various substrates
• Spray on thinly in a cross-coat from a distance of 20 - 30 cm
• For higher abrasion and corrosion protection, repeat 1 - 2 times after a short flash-off time
• Can be recoated after approx. 60 - 90 minutes, depending on layer thickness, temperature and humidity
• Use plastic primer for subsequent recoating or 2-component paint
• After use, spray the valve upside down until only propellant gas escapes
• Do not spray on moving or heat-stressed parts such as joints, engine, gearbox, cardan shaft, exhaust, catalytic converter or brake systems

Technical data:

• Base: Rubber and resins
• Recommended application temperature: 15 - 25 °C
• Properties: quick-drying, can be painted over, abrasion-resistant, anti-corrosive, sound-absorbing, permanently elastic
• can be painted over with most common water-based and solvent-based 2-component and base coats

Scope of delivery:

• 1x Liqui Moly stone chip protection coating spray can 500 ml