TEROSON PU 9225 - Anthracite-colored 2-component repair adhesive for plastic parts

With TEROSON PU 9225 you can reliably repair bumpers, spoilers and other body parts made of plastics such as PP/EPDM, SMC, PC, PA, ABS and PUR. The two-component polyurethane adhesive (polyurethane) is available in yellow (A) and black (B) and produces an anthracite-colored adhesive after mixing. It hardens at room temperature and can be sanded and painted over. For optimum results, clean and sand the surfaces in a V-shape, pre-treat them with TEROSON VR 10 or VR 20 and use the approved primer TEROSON 150. Processing is carried out with suitable manual pressure guns and static mixers; glass fiber fabric can be embedded for reinforcement. Discard the first 2 cm of adhesive from the cartridge and remove excess material immediately.

Details

• Two-component repair adhesive for paintable plastic parts indoors and outdoors
• Suitable for PP/EPDM, SMC, PC, PA, ABS and PUR as well as minor and structural damage
• Recommended pre-treatment: cleaning, v-shaped sanding (P80-P120), TEROSON VR 10/VR 20, TEROSON 150 primer
• Processing with TEROSON manual pressure guns and static mixers; glass fiber fabric can be used for reinforcement
• Sanding and finishing after complete curing (P150/P240, priming, filling/filler)

Technical data

• Technology: Polyurethane (polyurethane)
• Mixing ratio A : B = 1 : 1
• Color after mixing: dark grey
• Pot life: approx. 10 min at 23 °C
• Tack-free: approx. 30 min at 23 °C
• Hand strength: approx. 2 h at 23 °C; approx. 10 min at 80 °C
• Curing: approx. 5 h at 23 °C; accelerated 15 min at 60-70 °C
• Grindability: 5 h at 23 °C; 15 min at 60-70 °C
• Shore A hardness: approx. 90
• Tensile shear strength: approx. 13 MPa (0.3 mm layer; after 2 days)
• Processing temperature: 15 to 30 °C
• Service temperature: -40 to 80 °C
• Density component A: approx. 1.4 g/cm³; component B: approx. 1.7 g/cm³
• Storage: 10 to 25 °C, not sensitive to frost

Scope of delivery

• 1x TEROSON PU 9225 double chamber cartridge 50 ml