Teroson VR 155 Plastic primer Adhesion promoter 150 ml

Teroson VR 155 - Plastic primer for reliable adhesion during car body repairs

Teroson VR 155 is a xylene-free, solvent-based plastic primer based on chlorinated polyolefins and is used for optimum surface preparation before painting, bonding or sealing. The whitish transparent liquid improves adhesion to many plastics, can be applied easily and evenly using the aerosol method and dries quickly. It is suitable for repair adhesives, fillers and sealants, is CFC-free and must be handled safely as a flammable product. The solvent can attack certain plastics or coatings, so you should check compatibility. The product is a normal dangerous good in the form of pressurized gas packs and must be stored protected from frost.

Details:

• Product type: Primer for plastics and car body repairs
• Chemical type: Chlorinated polyolefins
• Appearance: Whitish, transparent liquid
• Components: Single component, no mixing required
• Viscosity: Liquid
• Contains no fckw
• Improves adhesion to PP/EPDM, polyolefin blends, SMC, PA and ABS
• Use before painting, bonding and sealing plastic parts
• Suitable for repair adhesives, fillers and sealants
• Easy to spray on using the aerosol method
• Not suitable for pure oxygen or strongly oxidizing media
• Check compatibility, as solvent can attack individual plastics
• Pre-cleaning of parts recommended, including drying and sanding with 120 grit
• Shake can vigorously for at least 1 minute before use
• Spray on thinly and evenly
• Clean the spray head after use
• Do not return removed material to the original packaging
• Minimum flash-off time: 5 minutes
• Protect from frost
• Optimum storage: 5 °C to 25 °C

Technical data:

• Specific weight at 23 °C: 0.9
• Drying time: 5 minutes
• Solids content: 4.5
• Operating temperature: -40 to 80 °C
• Application temperature: 15 to 30 °C

Scope of delivery:

• 1x Teroson VR 155 plastic primer 150 ml spray can