Truma CAN cable m4f-m4m-m4m 0.1 meter suitable for iNet X (Pro) and CAN-capable devices Spare part number 47000-00266

Truma CAN cable m4f-m4m-m4m 0.1 meter - Connect two CAN devices to the iNet X (Pro) panel

With the Truma CAN cable m4f-m4m-m4m 0.1 meter, you can use a single CAN socket on the iNet X (Pro) panel to connect two CAN-capable devices directly. The cable distributes the connection across two CAN connections. Important: As soon as two devices are connected to the panel, the 120 Ohm terminating resistor on the iNet X (Pro) panel, which is integrated in the 12 V power supply cable, must no longer be used. In this case, the panel is no longer located at the beginning or end of the CAN bus communication line. Instead, the terminating resistors must be set on the two devices that are physically located at the beginning and end of the CAN line.

• Enables the connection of two CAN-capable devices to a single CAN socket on the iNet X (Pro) panel
• Distributes one CAN connection to two connections

Technical data:

• Length: 0.1 meter
• Connection: m4f-m4m-m4m

• 1 x Truma CAN cable m4f-m4m-m4m 0.1 meter