Teroson PU 9225 2C repair adhesive for plastic parts 50 ml
Product details
| Two-component polyurethane adhesive for repairs to plastic body parts | Suitable for PP/EPDM, SMC, PC, PA, ABS and PUR | Curing at room temperature, can be accelerated by heating | Very good sanding and recoatability |
Product description
TEROSON PU 9225 - Anthracite-colored 2-component repair adhesive for plastic parts
With TEROSON PU 9225 you can reliably repair bumpers, spoilers and other body parts made of plastics such as PP/EPDM, SMC, PC, PA, ABS and PUR. The two-component polyurethane adhesive (polyurethane) is available in yellow (A) and black (B) and produces an anthracite-colored adhesive after mixing. It hardens at room temperature and can be sanded and painted over. For optimum results, clean and sand the surfaces in a V-shape, pre-treat them with TEROSON VR 10 or VR 20 and use the approved primer TEROSON 150. Processing is carried out with suitable manual pressure guns and static mixers; glass fiber fabric can be embedded for reinforcement. Discard the first 2 cm of adhesive from the cartridge and remove excess material immediately.
Details
- Two-component repair adhesive for paintable plastic parts indoors and outdoors
- Suitable for PP/EPDM, SMC, PC, PA, ABS and PUR as well as minor and structural damage
- Recommended pre-treatment: cleaning, v-shaped sanding (P80-P120), TEROSON VR 10/VR 20, TEROSON 150 primer
- Processing with TEROSON manual pressure guns and static mixers; glass fiber fabric can be used for reinforcement
- Sanding and finishing after complete curing (P150/P240, priming, filling/filler)
Technical data
- Technology: Polyurethane (polyurethane)
- Mixing ratio A : B = 1 : 1
- Color after mixing: dark grey
- Pot life: approx. 10 min at 23 °C
- Tack-free: approx. 30 min at 23 °C
- Hand strength: approx. 2 h at 23 °C; approx. 10 min at 80 °C
- Curing: approx. 5 h at 23 °C; accelerated 15 min at 60-70 °C
- Grindability: 5 h at 23 °C; 15 min at 60-70 °C
- Shore A hardness: approx. 90
- Tensile shear strength: approx. 13 MPa (0.3 mm layer; after 2 days)
- Processing temperature: 15 to 30 °C
- Service temperature: -40 to 80 °C
- Density component A: approx. 1.4 g/cm³; component B: approx. 1.7 g/cm³
- Storage: 10 to 25 °C, not sensitive to frost
Scope of delivery
- 1x TEROSON PU 9225 double chamber cartridge 50 ml
Features
| Type of adhesive, sealant | Adhesive |
| Colour | dark gray |
| ean | 4002872109917 |
| Manufacturer Article No. | 267081 |
Legal information
Hazard warnings
H315 - Causes skin irritation.
H317 - May cause allergic skin reactions.
H319 - Causes serious eye irritation.
H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 - May irritate the respiratory tract.
H351 - Suspected of causing cancer (state route of exposure if there is conclusive evidence that no other routes of exposure cause this hazard).
H373 - May cause damage to organs (state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if there is conclusive evidence that no other routes of exposure cause the hazard).
Manufacturer information
Henkel AG & Co. KGaA
Henkelstr. 67
40589 Düsseldorf
Germany
thomas.holzer@henkel.com
