Truma Storage Box Air Conditioner Saphir Comfort RC

Storage box air conditioner and heater in one The Truma Saphir comfort RC is a powerful storage box air conditioner that cools particularly quickly and efficiently. During cooling operation, the Truma Saphir simultaneously reduces the humidity and cleans the air thanks to the integrated lint and particle filters. It also serves as a heater with heat pump - thanks to the reversible cooling circuit. With a heat output of 1700 watts, the appliance provides pleasant warmth, especially in the transitional period.

• Practical timer function for automatic switch-on and switch-off
• Select temperature in one-degree increments
• Heats with up to 1700 watts in heat pump mode
• Can be used on campsites with a fuse rating of six amps or more
• Low weight of only 23.5 kilograms

Further details on the Truma Saphir comfort RC The storage compartment air conditioner can be controlled by remote control or on the CP plus iNet ready digital control panel. If you have installed a Truma Combi heater in your vehicle in addition to the air conditioning system, it is even possible to have automatic climate control. Your authorized Truma dealer will install the Truma Saphir comfort RC centrally in a storage box, for example in the seat chest. Thanks to the pre-assembled fastening system, installation is particularly quick. The storage box air conditioning system is ideal for vehicles over 5.5 meters in length and up to around 6.5 meters. For larger vehicles, we recommend installing two Saphir air conditioning systems.

• Particularly powerful cooling
• The smallest air conditioning system in its class: space-saving installation in the seat compartment
• Ideal for allergy sufferers: not only cools the air, but also cleans and dries it
• Four operating modes (cooling, heating, automatic, recirculation) and three fan speeds
• In the sleep function, the indoor fan runs at a low speed and is therefore very quiet

Installation Installation of the air conditioning unit itself is very simple. All you need are two cut-outs in the vehicle floor for air exchange (air inlet, air outlet) and a hole for the condensate drain. These floor openings are cut out using the enclosed template. The 230 V connection is then established, the infrared receiver for the remote control is fitted and an air circulation connection is created between the installation space and the living area.

With the flexible Truma cold air pipes, you can adapt the cold air installation to your individual requirements and, of course, change it later if necessary.