Product details
Internet where you want! | aerodynamic structure |
Delivery incl. mounting set | best reception characteristics |
Product description
Comfortably on the road with a mobile home network
Whether smartphone, tablet, laptop or smart TV - once logged into the home network, all devices remain connected to the Internet and nothing stands in the way of secure, fast surfing.
When travelling, however, campers often have to cut back when it comes to Internet: Unstable reception or congested WiFi/LTE networks at campsites are not uncommon. Ten Haaft offers a solution for travellers who need reliable reception for work while on the move or who do not want to do without a functioning Internet connection while on holiday.
Mobile Internet like at home - even while driving.
With the Oyster Connect, the engineers of the premium manufacturer of mobile satellite technology from Baden-Württemberg have developed a special antenna system for high demands: the mobile hotspot ensures a stable signal - even while driving.
You can surf in your motorhome, camper van or caravan in complete relaxation - and also enjoy all the advantages of a "mobile home network".
The connection is maintained regardless of location, no matter what network the external signal comes from - the registered end devices connect automatically to their own hotspot.
At the top - Oyster Connect
One of the main advantages of this special antenna system with its direct RF connection to the transmitter and receiver modules is that the mounting location of the Outdoor Unit is on top of the vehicle roof, thus enabling maximum transmission and reception power.
The Oyster Connect is therefore far superior to classic smartphone reception and products currently available on the market, as the attenuation of the signals by the vehicle body (thermal glazing / metal body) and the length of the antenna cable is no longer a factor.
Outdoor unit and indoor unit in perfect harmony
The Oyster Connect - Outdoor Unit
The highlight is that both an LTE and a dual band WiFi module are installed in the outdoor unit.
Each of these modules has a directly connected antenna system specially designed for this application, which ensures a longer range and, if the LTE network is overloaded by too many users, can reach not only the next but also the next but one radio mast. In the WiFi range, the MIMO system with 4 antennas ensures stable data throughput in both the 2.4 GHz band and the 5 GHz band. Behind MIMO is the ability to send and receive a data stream over several antennas through intelligent data processing (Multiple Input Multiple Output).
The LTE function is based on an ALL-band antenna in diversity technology. It supports all European LTE bands/providers and provides maximum transmit and receive power without antenna alignment.
The information received in front of the outdoor unit is transmitted loss-free to the indoor unit via a data cable.
The Oyster Connect - Indoor Unit
The second component of the Oyster® Connect system, the Indoor Unit, is located inside the vehicle and serves as a WiFi access point just like you know it from home. The Indoor Unit is a fully functional private access point with integrated 2.4 and 5 GHz WiFi antennas (2x2 MIMO technology). Both bands operate in parallel - so you can connect several mobile devices simultaneously, even on different bands, with the highest possible data transfer.
With the Indoor Unit, the desired end devices, such as Smartphone, Tablet, Laptop or Smart TV only have to be connected once. It also has a LAN connection and can therefore also set up a private wired LAN network. The Outdoor Unit is aerodynamically designed: With a height of only twelve centimetres and a length of about 40 centimetres, it fits on any leisure vehicle and is a convincing 1.5-kilogram lightweight.
When it comes to assembly, the ten Haaft engineers have remained true to their proven system: A mounting plate is glued to the roof and the antenna housing is mounted with four screws. If necessary, the inserted SIM card can be replaced at any time, for example with a country-specific SIM card.
A roof lead-through and the four-metre long data cable allow flexible installation on any vehicle.
Settings of the Oyster® Connect - Outdoor Unit:
Selection and configuration of the WiFi hotspot:
- Supports 2.4 and 5 GHz WiFi networks
- Setting automatic or manual switch to LTE network when WiFi is unavailable
- Setting the LTE access data (APN)
- Saving or deactivating the SIM pin
Settings of the Oyster Connect Indoor Unit:
Configuration of the private "home network
- Provides 2.4 and 5 GHz WiFi access points
- System updates
- Provides one RJ-45 port for a private wired LAN
The advantages at a glance
- Mounting the transmitter and receiver unit on the top of the vehicle roof prevents loss of damping
- Powerful WiFi antennas (2x2 MIMO) and LTE - Diversity antennas
- Unique and easy setup of the "Mobile Home Network
- Free selectability 2.4 GHz / 5 GHz in the WiFi network for both the indoor and outdoor unit
- Supports the European LTE bands B1/3/7/8/20/28/38/40/41
- Private LAN network enables WiFi network relief and not every Smart TV is WiFi capable
- Aerodynamic structure
- Simple assembly and space-saving design
- Weatherproof
- Comfortable operation
- 3 years warranty
Technical data:
- Operating voltage: 12/24V DC (voltage range 9-32V DC)
- Operating current consumption: <1 A
- Power consumption in operation: max.10 W
- Standby power consumption: < 0.1 W
- permissible maximum speed: 180 km/h
- Weight: Outdoor Unit with mounting plate approx. 1500 g
- Indoor unit approx. 250 g
- Mounting material approx. 230 g
- Dimensions (W x H x D) : Outdoor Unit: 40,5 x 12 x 29,2 cm
- Dimensions (W x H x D): Indoor Unit: 17.5 x 3 x 10.6 cm
Scope of delivery:
- Oyster Connect - Outdoor Unit
- Oyster Connect - Indoor Unit
- Roof bushing and data cable 4m
- Power supply cable Oyster® Connect - Indoor Unit
- Mounting plate
SIM card note:
For LTE operation a SIM card is required, which is not included in the scope of delivery. The connection costs incurred here and the Internet parameters (download / upload, int. roaming) depend on the respective network operator and must be checked by the customer himself.
Features
Type Internet & WLAN | LTE router |
Frequency | 5 GHz |
LAN | |
Output | 10 W |
Operating voltage | 12/24V DC |
WLAN | |
Colour | black |
Weight | 2 kg |
Dimensions (LxWxH) | 405 x 292 x 120 mm |