Victron SmartSolar MPPT Solar charge controller with Bluetooth control

Solar charge controllers
A solar charger is supplied with energy from solar modules and then stores it in batteries. Using the latest and fastest technology, SmartSolar maximizes this energy production and intelligently directs it to fully charge the batteries in the shortest possible time. The SmartSolar maintains the functionality of the battery, extending its life

Remote monitoring and control
You can remotely control and monitor the extensive features of your SmartSolar MMPT Charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. When your system is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT anytime, anywhere. Both services are available free of charge. For remote installations - even if there is no Internet connection and no telephone network available nearby - you can monitor your MPPT via Bluetooth coupling

Built-in Bluetooth Smart
The wireless solution for setting up, monitoring and updating the SmartSolar charge controller

PU.Direct
For a wired data connection with a Color Control GX, other GX products, a PC or other devices.

Ultrafast Maximum Power Point Tracking (MPPT)
Especially on overcast skies, when light intensity is constantly changing, an extremely fast MPPT controller improves energy output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. By continuously monitoring the voltage and current output of your solar (PV) modules, MPPT technology ensures that all energy available is extracted from the modules and stored. The advantage of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.

Advanced Maximum Power Point detection for partial shading
In case of partial shading, two or more points of maximum power (MPP) may be present on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimal MPP
The innovative algorithm of the BlueSolar device will always maximize the energy yield by adjusting to the optimal MPP

Excellent efficiency
No cooling fan. Maximum efficiency at over 98%. Full output current up to 40 C (104 °F)

Flexible charging algorithms
Fully programmable loading algorithm (see also the software page on our website) and eight pre-programmed algorithms that can be selected via a rotary knob (see our manual for more details)

Comprehensive electronic protection
Overheating protection and load reduction at high temperatures. Protection against PV short circuit and PV reverse polarity. PV reverse current protection

Internal temperature sensor
Balances constant and charge maintenance voltages according to temperature

Optional external battery voltage and temperature measurement via Bluetooth
A Smart Battery Sense or BMV-712 Smart Battery Monitor can be used to transmit battery voltage and temperature data to one or more SmartSolar charge controllers

	MPPT 100/30	MPPT 100/50
Battery voltage	12/24 V automatic selection	12/24 V automatic selection
Rated charging current	30 A	50 A
Nominal PV power, 12V *1a,b)	440W	700W
Nominal PV power, 24 V *1a,b)	880W	1400W
Maximum PV open circuit voltage	100V	100V
Max. PV short circuit current *2)	35A	60A
Peak efficiency	98%	98%
Own consumption	12 V - 30 mA	24 V - 20 mA
"Constant" charging voltage (absorption)	14.4 V / 28.8 V (adjustable)	14.4 V / 28.8 V (adjustable)
"Float" charging voltage	13.8 V / 27.6 V (adjustable)	13.8 V / 27.6 V (adjustable)
Charge algorithm	multistage, adaptive	multistage, adaptive
Temperature compensation	-16 mV/°C or -32 mV/°C	-16 mV/°C or -32 mV/°C
Operating temperature	-30 °C to +60 °C (full rated output up to 40 °C)	-30 °C to +60 °C (full rated output up to 40 °C)
Humidity	95% non-condensing	95% non-condensing
Data communication port	VE.Direct	VE.Direct

*1a) If more PV current is connected, the controller limits the input power
*1b) The PV voltage must reach at least Vbat + 5 V for the controller to start operating
After that the minimum value of the PV voltage is Vbat + 1 V

*2) A PV system with a higher short circuit current can damage the controller.